Appendix B: Connecting a PTZ Camera
PTZ Presets and PTZ Cruise
You can set preset positions for your PTZ cameras. You can also use PTZ cruise to have the camera automatically cycle through presets.
Setting PTZ Presets
1Using the PTZ controls, move the camera into position.
2(Optional) In the Time field, select the number of seconds the camera will remain in that position during PTZ cruise before going to the next position.
3Click Set to set the preset. The Total and No. field will automatically increase. The Total field shows you the total number of created presets, and the No. field shows you the number of the preset you are currently creating.
Total Number of presets 
Preset number |
|
|
|
|
| Go To Preset | |
|
|
| |||||
Time shown |
|
|
|
| Set Preset | ||
|
|
|
|
| |||
before changing |
|
|
| ||||
Save Presets
Clear Preset
4Complete the steps above to create additional presets as needed. Press Save when you are finished to save all created presets.
Selecting PTZ Presets
1In the No. field, select the number of the preset you would like to select.
2Click Go to to go to the preset.
Deleting PTZ Presets
1In the No. field, select the number of the preset you would like to delete.
2Click Clear to delete the preset and click Save to save your changes.
Starting / Stopping PTZ Cruise
When PTZ cruise is enabled, the camera will cycle through saved presets. You must set and save presets to use PTZ cruise.
To start / stop PTZ cruise:
1
). Enter the system password. The camera will cycle through PTZ presets.
•
). Enter the system password.
108
