Appendix C: Connecting Additional External Monitors
Configuring the Spot Monitor for
By default, a monitor connected to the Spot port automatically shows channels in Sequence View.
To configure the Spot monitor to show channels in
1
2Click Display and select the Output tab.
3Under Video Output, select
Select
Select Enable
Click Spot Sequence
4Under View Setup, select Enable. This lets you select and arrange the channels you want to show on the screen.
5Under View Mode, select Single to show 1 channel in
6Click Spot Sequence. A menu appears that allows you to select the arrangement of channels you would like to show on the Spot monitor.
7Click the
Select the channels that will be shown on the screen and the arrangement of channels
8Click Apply to save changes. Click Ok.
110