Remote Viewing Interface
system record motion events, enable motion recording in the recording calendar (Remote Setting tab>Record>Schedule).
Configuring Alarm Notifications
Configure the settings for alarm devices (not included).
To configure alarm notifications:
1Click the Remote Setting tab, and click Alarm >Alarm.
2Configure the following:
•Alarm In: Select the channel that you wish to configure.
•Alarm Type: Select the alarm type N/O (normally open), N/C (normally closed), of select OFF.
•Buzzer: Select the "beep" duration when an event occurs.
•Latch Time: Select the desired latch time when an alarm triggers.
•Show Message: Select the checkbox so that the system displays a warning message during an alarm recording.
•Send email: Select the checkbox for the system to send out email alerts during an alarm recording.
•Full Screen: Select the checkbox to enable the system to go into
•Alarm out: Select the checkbox to enable alarm out devices to activate.
•Enable Record: Select the checkbox to enable system recording when an alarm triggers.
•Post Recording: Select the desired post recording time after an alarm triggers.
•Record Channel: Select the channels that the system should record during an alarm trigger.
3Click Save to apply your settings.
80
