LOREX Technology LH1361001C8B, LH130 Connect the Monitor, Verify Camera Image, Set the Time, Hdmi

Basic Setup

Step 4: Connect the Monitor

•Connect a HDMI cable (included with 8/16-channel models only) from the HDMI port to the TV or monitor (recommended) OR;

•Connect a VGA cable (not included) from the VGA port to the monitor.

NOTE:IfyouhaveamonitorwithaDVIinput,youmustuseanHDMItoDVIadapter(notincluded). You cannot use an DVI to VGA adapter.

8-channel model shown

HDMI VGA

Step 5: Connect the Power Adapter and Power on the DVR

•Connect the included power adapter to the DC 12V port. Connect the end of the power adapter to a wall socket or a surge protector.

•Turn the power switch to I to turn on the DVR. At startup, the system performs a basic system check and runs an initial loading sequence. After a few moments, the system loads a live display view.

8-channel model shown

DC 12V port ON

Step 6: Verify Camera Image

•Power on the cameras, and then verify the camera video quality before mounting the cameras to a permanent location.

•Mountthecamerasunderashelteredlocation.Alwaysverifytheoutdoorratingofyourcamera before installing it in a permanent location.

Step 7: Set the Time

•Set the system time and date for accurate video time stamps. Videos with inaccurate times may not be valid as surveillance evidence.

•For details on setting the system time, see “Setting the Date and Time” on page 20.

8