Convenient CD recording 45
Giving preference to the tape length over the title sequence
(CD EDIT)
When the tape recording time is specified, recording is ex- ecuted with changing the title sequence so that no title will be interrupted when the tape direction is changed at the end of one side.
When the equalizer or SRS 3D is applied to the sound, the sound with the applied effect can be re-
corded.i
When Dolby Pro Logic, Dolby 3 Stereo or DSP mode is selected, cancel it by pressing the STEREO key of the remote control unit.
Recording preparations are required. ¥ (Steps 1 to 3) (For the reverse mode, select “ p”
1Press the DUBBING key.
2Select “CD EDIT” and press the SET key.
1 2
MULTI
CONTROL
SET
3Select a disc and press the SET key.
1 2
MULTI
CONTROL
SET
CD ONE TRACK RECORD (Only during CD playback) | |
CD RECORD |
|
CD EDIT | CD E DI T |
| |
CD PGM RECORD |
|
TAPE DUBBING |
|
|
(Only when the selected input is TAPE and tapes are present in both decks A and B)
DIsC 2
ÖEven if the disc has already been selected, select the disc again.
4Set the tape length (recording time) and press the ENTER key. |
| |
1 | 2 | |
| MULTI |
|
| CONTROL |
|
|
| Automatic editing of tape sides A and B |
| ENTER |
|
|
| ENTE R |
5Start edit recording. |
|
|
Application section
Press the ENTER Key.
ENTER
Press the CD PGM key twice to cancel CD EDIT.
EDIT | A T 0 1 | |
1 | 2 | 3 |
|
|
|
ÖThe tape and CD stop automatically when recording has completed.
ÖPress the stop (7) key to stop recording in the middle.
ÖIf you commit an error in the time entry, restart the procedure from step 1.
Depending on the combination of conditions from CD contents (number of titles and length of the titles) and tape recording time, interruption
Note of a title may not be avoidable. In such a case, the respective title will not be recorded.