Select speaker output, HDMI-CEC audio device

[Amplifier]: Stream audio through the connected HDMI-CEC device. If system audio mode is not enabled on the

device, audio continues to stream from the TV speakers. If [EasyLink autostart]

was selected, the TV prompts the connected device to switch to system audio mode.

1.Press .

2.Select [Setup] > [TV settings] > [General

settings] > [EasyLink] > [EasyLink remote control].

3.Select [On] or [Off], then press OK. Tips:

∙To switch back to TV control, press , then select [Watch TV].

∙To control another device, press , then select the device from the Home menu.

EasyLink buttons

You can control HDMI-CEC compliant devices with the following buttons on the TV remote control:

∙: Switch the TV and the connected device on or to standby.

∙Numeric buttons: Select a title, chapter or track.

∙OK: Start, pause or resume play on the connected device, activate a selection, or access the device menu.

∙: Display the TV Home menu.

Switch off connecting devices

You can also set the TV to switch off the connecting HDMI-CEC compliant devices if they are not the active source. The TV switches the connecting device to standby after 10 minutes of inactivity.

1.Press .

2.Select [Setup] > [TV settings] > [General

settings] > [EasyLink].

3.Select [Auto switch off devices] > [On], then press OK.

Select speaker output

If a connected device is HDMI Audio Return Channel (HDMI ARC) compliant, you can output TV audio through an HDMI cable. Additional audio cables are not required. Make sure you connect the device to the

HDMI ARC connector on the TV. See Connect your TV > About cables > HDMI

(Page 31).

Switch on HDMI ARC

1.Press .

2.Select [Setup] > [TV settings] > [Sound]

>[Advanced] > [HDMI 1 - ARC].

EN 42

3.Select one of the following, then press OK.

∙ [On]: Hear the TV audio through the connected HDMI-ARC compliant

device.

∙ [Off]: Hear the TV audio through the TV speakers, or through a device connected through the digital audio out connector.

Note: Make sure that all HDMI-CEC settings are properly set up on the connected device. Set up TV speakers

1.Press .

2.Select [Setup] > [TV settings] > [Sound]

>[Advanced] > [TV speakers].

3.Select an option, then press OK: ∙ [Off]: Switch off TV speakers. ∙ [On]: Switch on TV speakers.

∙ [EasyLink]: Switch off TV speakers and stream TV audio to a connected

HDMI-CEC audio device.

∙ [EasyLink autostart]: When a HDMI- CEC audio device is connected, automatically switch off TV speakers and stream TV audio to the device.

Change TV audio streaming

You can switch audio between TV speakers and a connected amplifier at any time.

1.Press OPTIONS.

2.Select [Picture and sound] > [Speakers].

3.Select one of the following, then press OK.

∙ [TV]: On by default.

Stream TV audio through TV and the connected HDMI-CEC audio device until the connected device switches to system audio control. TV audio is then streamed through the connected device.

∙