Switch the TV on
∙Connect the TV to the mains outlet and switch on the main power.
∙If the TV is not switched on, the standby LED remains off. Press 
on the TV.
∙If the standby LED is lit, press 
on the remote control.
Note: There is a short delay before the TV
responds.
Tip: If you cannot find your remote control and want to switch on the TV from standby, press any button the TV.
Switch TV to standby
Press 
on the remote control.
The standby LED on the TV switches to red.
Switch off the TV
Press 
on the TV.
The standby LED switches to off.
Note: Though your TV consumes very little energy when it is in standby or switched off, it does use some energy. If you are not going to use the TV for an extended period of time, disconnect the TV from the mains plug.
Automatic switch off
You can save energy with this TV's energy efficiency settings, which are enabled by default. If there is no user interaction (such as pressing a remote control button or a control on the TV) for four hours, the TV will automatically switch to standby.
To disable automatic switch off
1.While you watch TV, press the Green button on the remote control.
2.Select [Auto switch off], then press OK.
3.Use the Navigation buttons to select [0 mins], then press OK.
Adjust TV volume
Increase or decrease the TV volume
∙Press +/- on the remote control.
∙Press 
+/- on the TV.
Mute or restore the TV volume
∙Press 
on the remote control to mute the volume.
∙Press 
again to restore the volume. Adjust headphone volume
1.Press 
.
2.Select [Setup] > [TV settings] > [Sound]
>[Headphone volume], then press OK.
3. Select a level.
Switch TV channels
English
EN 11