Philips HFL3008W, HFL3008D user manual Set up EasyLink devices, Control devices

Rename a device

You can rename a device after it is connected to the TV.

1.Press SOURCE.

2.Select the connector, then press [Rename].

3.Use the on-screen keypad to enter a new name.

4.When complete, select [Done], then press OK.

Reset device settings

You can reset the type and name of the device to default settings.

1.In the [Source] menu, select the device and press OPTIONS.

2.Select [Original name and icon], then press OK.

Set up EasyLink devices

What you can do

You can get the most out of your HDMI- CEC-compliant devices with Philips EasyLink enhanced control features. Connect your HDMI-CEC compliant devices through HDMI to your TV and control them at the same time with your TV remote control.

Note: Other brands describe HDMI-CEC functionality differently. Some examples are Anynet (Samsung), Aquos Link (Sharp) or BRAVIA Sync (Sony). Not all brands are fully compatible with Philips EasyLink.

After you have switched on Philips EasyLink, the following features are available:

One-touch play

When you play an HDMI-CEC compliant device, the TV switches on from standby and switches to the correct source.

One-touch standby

When you press on the TV remote control, the TV and all HDMI-CEC compliant devices switch to standby mode.

Auto switch off inactive devices

If a HDMI-CEC compliant device has been inactive for some time, it switches to standby mode.

EasyLink remote control
You can control multiple HDMI-CEC	English
compliant devices with your TV remote
control.
System audio control
If you connect an HDMI-CEC compliant
device that includes speakers through the
HDMI ARC connector, you can choose to
hear the TV audio from those speakers
instead of the TV speakers.
Retain picture quality
If your TV picture quality is affected by the
picture-processing features of other devices,
you can switch on Pixel Plus Link to retain
picture quality.
Maximise display for subtitled video
Some video subtitles can create a separate
subtitle bar under the video, which limits the
video display area. To maximise the video
display area, you can switch on auto subtitle
shift and display the subtitles on the video
image.

What you need

∙Connect an HDMI-CEC compliant device to the TV. You can connect

more than one HDMI-CEC device. See Connect your TV > Connect devices (Page 32).

∙Configure each HDMI-CEC compliant device properly.

∙Switch on EasyLink.

Switch on EasyLink

1.Press .

2.Select [Setup] > [TV settings] > [General

settings] > [EasyLink].

3. Select [EasyLink] > [On], then press OK.

Control devices

If you connect multiple HDMI-CEC devices that support this setting, you can control all such devices through the TV remote control.

Note: This is an advanced setting. Devices that do not support this setting cannot respond to the TV remote control.

EN 41