Philips 55PFL4909, 43PFL4909 Connecting Antenna or Cable / Satellite / Iptv Box, RF cable

Connecting Antenna or Cable / Satellite / IPTV Box

Be sure your Antenna or another Device is connected properly before plugging in the AC Power Cord.

If connecting to an Antenna through an RF cable

Any DTV Programs that are Broadcast in your area can be received for free through an Antenna Connection.

	Cable
antenna	OUT
IN	RF cable

If connecting Cable / Satellite / IPTV Set-top box using an RF cable

If the TV is connected to a Cable / Satellite Set-top Box via a Coaxial Connection, set the TV to channel 3/4 or the channel specified by the service provider.

	RF cable
antenna	IN
	OUT
RF cable	Set-top Box
IN

If connecting Cable / Satellite / IPTV Set-top Box using an HDMI cable

If the TV is connected to a Cable / Satellite Set-top Box via an HDMI cable, make sure you select the correct Source by using S SOURCE.

		RF cable
	HDMI cable	IN
IN		OUT
		Set-top Box

If connecting Cable / Satellite / IPTV Set-top box using Component Video Input

If the TV is connected to a cable / satellite set-top box via Component Video Input, make sure you select the correct Component Video Source by using S SOURCE.

	Audio (L/R) cables	RF cable
		OUT
IN		IN
IN	Component (Y/Pb/Pr)	Set-top Box
	Video cables	OUT

15 .English

Connecting a Cable / Satellite / IPTV Box, Blu-ray Disc / DVD Recorder via Composite Connectors and Analog Audio

Do Not place your Recorder too close to the Screen because some Recorders can be susceptible to harmful interference from the TV.

	OUT		Cable
	RF cable	IN	Set-top Box
	RF cable	OUT	OUT
	IN	Audio (L/R) +
		Video cables
		OUT	IN
		OUT
IN	Audio (L/R) + Video cables

Blu-ray disc/DVD Recorder

Note(s)

●If you have any question about the DTV’s Antenna, visit www.antennaweb.org for further information.

●Depending on your Antenna system, you may need different types of combiners (mixers) or separators (splitters) for HDTV Signal. The minimum RF bandpass on these Devices is 2,000MHz or 2GHz.

●For your safety and to avoid damage to this Unit, please unplug the RF Coaxial Cable from the Antenna Input jack before moving the Unit.

●If you did use an Antenna to receive Analog TV, it should also work for DTV reception. Outdoor or attic Antennas will be more effective than a Set-top Box or inside Antenna.

●To Turn On your reception source easily between Antenna and Cable, Install an Antenna selector.

●If you are not receiving a Signal from your Cable service, contact the Cable provider.

Plugging in the AC Power Cord

Make sure that the AC power cord must be plugged to an AC outlet after all the necessary connections are made.

Caution(s)

●Do Not connect the AC Power Cord to an AC Power Supply outside the indicated voltage of this Unit (120V AC).

●Connecting the AC Power Cord to a Power Supply outside of this range may result in Unit failure, degradation or electrical shock.

Note(s)

●Each time you plug in the AC Power Cord, no operations will be performed for several seconds. This is not a malfunction.

Continued on next page.