Manually enter your SSID
Set up the connection to the AP (e.g. wireless router) manually by entering the SSID.
4Use H I to select Manually enter your SSID, then press OK.
●AP (e.g. wireless router) SSID entry screen will appear. Enter the SSID using H I J K, then press OK.
5Use HI to select the authentication setting of the selected wireless network.
●For a wireless network with authentication setting, select the authentication setting, according to the security type of the wireless network.
Auto | XXXXXXXXXXXXXX None |
Manually enter your SSID | WEP |
| WPA/WPA2 |
|
|
None | Set the authentication setting to None. |
WEP | Set the authentication setting to WEP*. |
WPA/WPA2 | Set the authentication setting to WPA/WPA2 |
●For a wireless network without authentication setting, select None.
●If you select WEP* or WPA/WPA2, WEP* / WPA / WPA2 Key entry screen will appear. Enter the WEP* / WPA / WPA2 key of the selected wireless network using H I J K, then press OK.
●Confirmation message will appear. Select Yes to complete the settings.
*WEP is not recommended to be used due to its Major security flaws. Change the Security protocol on the wireless router to WPA or WPA2 (recommended) mode.
42 .English
IP configuration
In following cases, select IP configuration to set each setting as necessary.
–When connection test failed with the setting of Connection test.
–When instructed by your Internet service provider to make specific settings in accordance with your network environment.
3Use H I to select IP configuration, then press OK.
4 Use H I to select a setting, then press OK.
| Network selection | IP setting mode | Manual |
| |||
| Wireless network setting | IP address | 192.168.11.3 |
| |||
| IP configuration |
| Subnet mask | 255.255.255.0 |
| ||
| Proxy configuration | Default gateway | 192.168.11.1 |
| |||
|
|
|
| Primary DNS | 192.168.11.1 |
| |
|
|
|
| Secondary DNS | 0.0.0.0 |
| |
|
|
|
| MAC address | 00:12:0E:10:09:15 |
| |
|
|
|
|
|
|
| |
|
|
|
|
|
| ||
| IP setting |
| Auto |
| Sets the IP setting automatically. |
| |
| mode |
| Manual |
| Sets the IP setting manually. |
| |
| IP address *1, 3 |
| A set of numbers which are assigned to |
| |||
|
| devices participating in a computer |
| ||||
|
|
|
|
| network. |
|
|
| Subnet mask *1, 3 |
| A mask which is used to determine what |
| |||
|
| subnet an IP address belongs to. |
| ||||
|
|
|
|
|
| ||
| Default gateway *1, 3 |
| IP address of the network device (such as |
| |||
|
| router) which provides Internet access. |
| ||||
|
|
|
|
|
| ||
| DNS |
| Auto |
| Sets the DNS setting automatically. |
| |
| setting |
|
|
|
|
|
|
|
| Manual |
| Sets the DNS setting manually. |
| ||
| mode |
|
|
| |||
|
|
|
|
|
|
| |
| Primary DNS *2, 3 |
| A server which handles the name and IP |
| |||
|
| address over the Internet. |
| ||||
|
|
|
|
|
| ||
| Secondary DNS *2, 3 |
| A server which handles the name and IP |
| |||
|
| address over the Internet. |
| ||||
|
|
|
|
|
| ||
| MAC address |
| An address which recognizes the devices |
| |||
|
| connecting to the network. It is also called |
| ||||
|
|
|
|
| Hardware Address. |
|
|
*1 Items can be selected only when IP setting mode is set to Manual.
*2 Items can be selected only when DNS setting mode is set to Manual.
*3 Use H I or the NUMBER buttons to input numbers. When you use H I to input numbers, then press OK or input the triple digits by using the NUMBER buttons, the cursor moves to the next entry field. When you use HI to input numbers, then press OK or input the triple digits by using the NUMBER buttons at the rightmost entry field, numbers will be stored and go back to the previous menu.
Continued on next page.