Philips 40PFL4909, 43PFL4909, 43PFL4609, 65PFL4909, 55PFL4909, 49PFL4609, 32PFL4609, 40PFL4609 Hdtv

				to Turn Off image
			PC	enhancement features
				which makes the TV to
Mode selection				act purely as a monitor
					to enable image
		HDTV			enhancement features
					to improve picture
					quality
Auto adjustment	to adjust the Horizontal / Vertical position, Clock
	and Phase of the PC screen automatically
		J	Cursor		Cursor	K
Clock	to Decrease setting			to Increase setting
Phase	value			value
Horizontal	to move PC screen left			to move PC screen
position				right
Vertical position	to move PC screen			to move PC screen up
	down

You can set a Particular Picture Quality using Advanced settings.

Auto picture		Color alignment			Mode
Backlight		Noise reduction			Auto
Contrast		*1Light sensor			On
Brightness		Black stretch			Medium
Color		Dynamic contrast			Maximum
Tint		Gamma
Sharpness		*2Perfect Motion Rate			Off
Advanced settings MPEG artifact reduction					Medium
			to set the color temperature to Personal,
		Mode	Cool, Normal and Warm.
			When you adjust the following settings,
			Personal will be set automatically.
			J	Cursor		Cursor	K
		Red gain	to Decrease Red			to Increase Red
			Contrast			Contrast
Color		Green gain	to Decrease Green			to Increase Green
			Contrast			Contrast
alignment
		Blue gain	to Decrease Blue			to Increase Blue
			Contrast			Contrast
		Red offset	to Decrease Red			to Increase Red
			Brightness			Brightness
		Green	to Decrease Green			to Increase Green
		offset	Brightness			Brightness
		Blue offset	to Decrease Blue			to Increase Blue
			Brightness			Brightness
Noise	to select the desired setting, then press OK
reduction	(Off, Minimum, Medium, Maximum and Auto)
		Off	to set Light sensor to Off
Light			to adjust backlight for the best picture
sensor *1		On	quality by dynamically adjusting the
			backlight intensity in accordance with
			lighting condition in the room
Black	to select the desired setting, then press OK
stretch	(Off, Minimum, Medium and Maximum)
Dynamic	to select the desired setting, then press OK
contrast	(Off, Minimum, Medium and Maximum)

31 .English

Gamma		J	Cursor		Cursor	K
	to adjust the gamma encoding of images
Perfect	Off		to set Perfect Motion Rate (or 120
Motion Rate			PMR)*2 to Off
(or 120
	On		to make the video appear smooth
PMR)*2
MPEG	to select the desired setting, then press OK
artifact
	(Off, Minimum, Medium and Maximum)
reduction
Color	Off		to set color enhancement to Off
enhancement	On		to make colors more vivid and bright
	to select the desired setting, then press OK
	(Red, Yellow, Green, Cyan, Blue and Magenta)
			J	Cursor	Cursor	K
			to rotate only		to rotate only
					selected color tint
	Tint		selected color tint
Custom					in
			in clockwise
					counterclockwise
color			direction
management					direction
	Saturation		to decrease color		to increase color
			with only selected		with only selected
			color		color
	Brightness		to decrease		to increase
			brightness with		brightness with
			only selected color		only selected color
Film mode	Off		to set film mode to Off
	Auto		to optimize the picture recorded by the
			original film

Note(s)

●Mode selection is available only if

–the external Input modes are selected HDMI 1, HDMI 2 or HDMI 3.

–the connected HDMI device is outputting a video signal.

●Adjusts backlight for the best picture quality by dynamically adjusting the backlight intensity in accordance with lighting condition in the room when Light sensor*1 is set to On. Please ensure the room lighting is stable and the light sensor is not blocked.

*1 Not available for 32PFL4909, 32PFL4609, 28PFL4909, 28PFL4609.

*2 For 55PFL4909, 55PFL4609, 50PFL4909, 49PFL4909, 49PFL4609, 43PFL4909, 43PFL4609, 40PFL4909, 40PFL4609, 32PFL4909, 32PFL4609, 28PFL4909 and 28PFL4609, 120 PMR will be displayed instead of Perfect Motion Rate.

Continued on next page.