Child lock code
You can set or change the Child lock code.
To set the lock code or to change the current code . . .
1 - Press and select Setup and press OK.
2 - Select Satellite settings > Child lock > Change code and press OK.
3 - If a code is set already, enter the current Child lock code and then enter the new code twice.
The new code is set.
Forgotten your Child lock code?
If you forgot your code, you can override the current code and enter a new code.
1 - Press and select Setup and press OK.
2 - Select Satellite settings > Child lock > Change code and press OK.
3 - Enter the overriding code 8888.
4 - Now enter a new Child lock code and enter it again to confirm.
8.5
Satellite installation
Installing satellites
About installing satellites
This TV has a
Up to 4 satellites
You can install up to 4 satellites (4 LNBs) on this TV. Select the exact number of satellites you wish to install at the start of the installation. This will speed up the installation.
Unicable
You can use a Unicable system to connect the antenna dish to the TV. Select if you are installing satellites for a Unicable system, for 1 or for 2 satellites at the start of the installation.
MDU -
The satellite receiver of this TV supports MDU on the Astra satellites and for Digiturk on the Eutelsat satellite. MDU on Türksat is not supported.
Installing
You can install your satellites during the initial TV setup. The satellite installation follows the TV channel installation. If you only watch satellite channels, you can skip the TV channel installation. You can always start a new satellite installation from the Setup menu.
To install satellite channels . . .
1 - Press and select Setup and press OK.
2 - Select Search for satellite and press OK. 3 - Select Install satellites and press OK.
4 - The TV shows the current installation setting. If the current setting corresponds with the satellite installation you want, you can start searching for satellites. Select Search and press OK. Go to step 5. If the current setting is not the setting you want, select Settings and press OK. Go to step 4b.
4b - In the Settings menu, select the exact number of satellites you want to install. Or, if you use a Unicable setup, select Unicable for 1 satellite or Unicable for 2 satellites according the number of satellites you want to install for Unicable. Select the setting you want and press OK.
4c - If the exact number of satellites is set or you completed the Unicable settings, select Search and press OK.
5 - The TV will search for satellites available on the alignment of your antenna dish. This may take a few minutes. If a satellite is found, its name and reception strength are shown on screen.
6 - If a channel package is available for any of the satellites found, you can select the package you want.
7 - To install the channels of the satellites found, select Install and press OK. The TV shows the number of channels and radio stations found.
8 - To store the satellite settings, all satellite channels and satellite radio stations, select Finish and press OK.
Channel packages
About channel packages
Satellites can offer channel packages that bundle free channels
If you choose a subscription package, the TV might ask you to select a Quick or Full installation.
Select Satellite operator channels only to install the channels of the package only or select All satellite channels to install the package and all other available channels too. We recommend a Quick installation for subscription packages. If you have additional satellites that are not part of your subscription package, we recommend a Full installation. All installed channels are put in the channels list All.
36