TV channel you want to install on a channel number with multiple TV channels.
DVB-T + DVB-C
If you can use a
Once each system is installed, you need to switch the antenna input signal on the Antenna connection on the back of the TV and set the TV in the appropriate system to view the installed channels on TV.
To select the
DVB settings
Access DVB settings
1 - Press and select Setup and press OK.
2 - Select Search for channels and press OK.
3 - Select
4 - Select the country where you install this TV.
5 - Select Cable
6 - Select Start to search channels, or select Settings for DVB- C settings.
7 - Press , repeatedly if necessary, to close the menu.
Symbol rate mode
If your cable provider did not give you a specific symbol rate value to install the TV channels, leave the Symbol rate mode setting on Automatic.
If you received a specific symbol rate value, select Manual. However, the value you received could be in the predefined list of symbol rates already. Select Predefined symbol rates to check if your value is available automatically.
Symbol rate
With the Symbol rate mode set to Manual, you can enter the symbol rate value you received from your cable provider. To enter the value, use the number keys.
Network frequency mode
If you intend to use the fast Quick scan method in Frequency scan to search for channels, select Automatic. The TV will use 1 of the predefined network frequencies (or HC - homing channel) as used by most cable providers in your country.
If you received a specific network frequency value to search for channels, select Manual.
Network frequency
With the Network frequency mode set to Manual, you can enter the network frequency value received from your cable provider here. To enter the value, use the number keys.
Frequency scan
Select the method of searching for channels. You can select the faster Quick scan method and use the predefined settings used by most cable providers in your country.
If this results in having no channels installed or if some channels are missing, you can select the extended Full scan method. This method will take more time to search for and install channels.
Digital channels
If you know your cable provider is not offering digital channels, you can skip searching for digital channels.
Select Off.
Analogue channels
If you know your cable provider is not offering analogue channels, you can skip searching for analogue channels. Select Off.
Free / Scrambled
If you have a subscription and a CAM - Conditional Access Module for pay TV services, select Free + scrambled. If you did not subscribe to pay TV channels or services, you can select Free channels only.
For more information, press Keywords and look up CAM - Conditional Access Module.
Reception quality
If you receive digital channels, you can check the quality and signal strength of a channel.
If you have your own antenna, you can reposition the antenna to try and improve the reception.
To check the reception quality of a digital channel . . .
1 - Tune to the channel.
2 - Press and select Setup and press OK.
3 - Select Channel settings > Channel installation > Digital : reception test and press OK.
The digital frequency is shown for this channel. If the reception is poor, you can reposition your antenna. To check the signal quality of this frequency again, select Search and press OK.
To enter a specific digital frequency yourself, use the remote
32