Philips 22PFL4208H/K/T Satellite settings, Install satellite channels, Check the country setting

Page 36

Step 1: Check the country setting

1.Switch on the first TV (with the channels that you want to copy to the second TV).

2.Press .

3.Select [Setup] > [Search for channels] > [Reinstall channels], then press OK.

The country menu is displayed.

4.Make a note of the current setting.

5.Press .

6.Press [Cancel] to exit.

Step 2: Copy channel list to USB

1.Connect a USB storage device to the first TV (with the channels installed on it).

2.Press .

3.Select [Setup] > [Channel settings] or [Satellite settings].

4.Select [Channel installation] > [Copy channel list] > [Copy to USB], then press OK.

The channel list is copied to the USB storage device.

5.Disconnect the USB storage device.

Step 3: Copy channels to a TV with no channels installed

1.Switch on the second TV, on which you want to copy the channel list.

Initial installation starts.

2.Follow the onscreen instructions and select the same country as the TV whose channel list you want to copy.

3.Skip the search for channels.

4.Connect the USB storage device.

5.Press .

6.Select [Setup] > [Channel settings] or [Satellite settings].

7.Select [Channel installation] > [Copy channel list] > [Copy to TV], then press OK.

The channel list is copied to the TV storage device.

8.Disconnect the USB storage device.

Step 3: Copy channels to a TV with pre- installed channels

1.Switch on the second TV, on which you want to copy the channel list.

2.Press .

3.Select [Setup] > [Search for channels] > [Reinstall channels], then press OK.

The country menu is displayed.

EN 36

4.Make sure that the country setting is the same as for the first TV.

5.Press .

6.Press [Cancel] to exit.

7.If the country setting is different, reinstall

the second TV to match the country setting of the first TV. See Change your TV settings > Reset all (Page 41).

8.Connect the USB storage device to the second TV.

9.Press .

10.Select [Setup] > [Channel settings] or [Satellite settings].

11.Select [Channel installation] > [Copy channel list] > [Copy to TV], then press OK.

The channel list is copied to the second TV.

12.Disconnect the USB storage device.

Satellite settings

What you can do

This TV can receive signals from 4 different low noise block-down converters (LNBs). An LNB is mounted at the end pole of the dish antenna and captures signals from a satellite.

Note:

Satellite reception is available for certain models only. [Search for satellite] is only available if the TV supports DVB-S.

To receive satellite channels, connect a satellite receiver to the SAT connector on your TV.

Install satellite channels

Reinstall satellites

1.While you watch TV, press .

2.Select [Setup] > [Search for satellite] >

[Reinstall satellites].

3.Follow the onscreen instructions to complete the installation.

4.Once complete, select [Finish], then press OK.

Image 36
Contents 22PFL4208H/K/T 24PFL42x8H/K/T Contents Safety PrecautionsRisk of electric shock or fire Placement tips CareScreen Legal Lock the TVOpen source Trademarks and copyrightsSustainability Energy efficiencyRecycling Help and support Contact Philips Sensors and indicators Rear controls Remote controlTV controls On-screen remote control EasyLink controlsSwitch TV on or off Adjust TV volumeWatch TV Smartphone controlSwitch TV channels Manage favourite channelsManage channel lists Use picture and sound presets Watch connected devicesView programme guide Change picture formatWhat you can do From the broadcasterPlay multimedia files From the InternetPlay files from computer Play files from USB device Play optionsPlay DivX VOD Video On Demand ∙ To skip to the next or previous track, press CH+ or CH∙ To skip forward or backward 10 seconds, press or ∙ To stop the music, press Music optionsSmart TV What you needAccess Smart TV apps Smart TV optionsRent online videos Access interactive TV Interactive TVTV Connect to a network You can identify channels that offerInstall USB hard drive Pause TV∙ You can pause a programme for a maximum of 90 minutes Record TV shows Pause a live TV broadcast∙ Tune your TV to receive digital TV Start recording Schedule recordingsOne-touch recording View programme informationUse Skype Watch recordingsDelete recordings Start Skype Manage contactsMake voice and video calls Online statusMake a voice call Select the contact, then press OKSkype settings Manage voicemailsPlay games View TextSet locks and timers Sleep timer Satellite settings Child lockChild lock Parental ratingSettings assistant More picture settingsPicture and sound More sound settings Audio formatReset picture and sound Automatic installationInstall analogue channels Install digital channelsUpdate channel list Fine-tune analogue channelsCopy channels Satellite settings Install satellite channelsCheck the country setting Once complete, select Finish, then press OKLanguage settings Add and remove satellitesMenu language Audio languageUniversal access settings Other settings Update softwareHome mode TV demoUpdate with USB Update from digital broadcastReset all Update from the InternetYou can also update the TV software ∙ Match the Y Pb Pr connector colours to the cable plugs About cablesCable quality Pb PrConnect antenna Cvbs connections provide standard picture qualityConnect the antenna to the TV Connect devices Blu-ray or DVD disc playerConnect the disc player to the TV with an Hdmi cable TV receiver Video recorder Connect the recorder to the TV with an antenna cableConnect the recorder to the TV with an Hdmi cable Connect the recorder to the TV with a Scart cableGame console Home theatre Page Digital camera Digital camcorderConnect the digital camera to the TV with a USB cable Connect more devices USB storage deviceComputer ∙ If you need extra USB connectors, use a USB hub Video call cameraKeyboard and mouse Connect the keyboard and mouse to the TV with a USB cableSet up EasyLink devices Update the source listChange device settings Watch connected devices∙ Display the TV Home menu Switch off connecting devices Control devicesOne-touch play One-touch standbySelect speaker output Retain picture qualityMaximise video display Wired connection WiFi integratedConnect to a network and the Internet ConnectNetwork settings Scan for routersIf prompted, agree to the End User Licence Agreement Connect a CAM Conditional Access Module Access CAM servicesSwitch on Miracast Clear Wi-Fi Miracast devices Switch on remote recordingGeneral issues Channel issuesPicture issues Sound issuesNo digital channels were found during the installation There is a picture but sound quality is poorConnection issues Network issuesThere are problems with Hdmi devices CompatibleContact Philips Power and reception Display resolutionsDisplay and sound MultimediaJpeg *.jpg, *.jpeg, *.mpo Supported audio/video formats Supported audio formats ∙ USB 1 ∙ Headphones Stereo 3.5 mm mini-jack ConnectivityHelp version UMv 420812130302Index EPG, broadcaster 13 EPG, Internet 13 external hard disk Reinstall 34 remote control 9 rename channels Universal access, enable From Koninklijke Philips Electronics N.V