Switch on Miracast
This TV is a
1.Press .
2.Select [Setup] > [Network settings] >
3.Select [On], then press OK to enable Miracast.
Tip: To clear the history of all
>[Clear Wi-Fi Miracast devices].
Switch on remote recording
This TV supports remote recording scheduled from a
Note: If you switch on remote recording, the TV consumes more power in standby.
1.Press .
2.Select [Setup] > [Network settings] >
[MyRemote Recording].
3. Select [On], then press OK.
Connect a CAM
(Conditional Access
Module)
What you can do
You can watch scrambled digital TV channels with a Conditional Access Module (CAM). Once you have inserted the CAM and paid the subscription fees, you can watch the programmes.
This TV supports CI (Common Interface) as well as CI+. CI+ supports premium HD digital programmes with a high level of copy protection.
Note: The applications, functions, content and onscreen messages depend on the CAM service provider.
What you need
Caution: To protect the CAM from damage, insert the CAM as instructed.
EN 60
Note: Refer to the documentation from your service operator on how to insert a smart card into the Conditional Access Module.
1.Switch off the TV.
2.Follow the directions printed on the CAM to insert the CAM into the Common Interface slot at the side of the TV.
Push the CAM in as far as it will go.
3.Switch on the TV, then wait for the CAM to be activated. This takes a few minutes. To maintain access to encrypted digital TV channels, leave the CAM in the slot.
Access CAM services
1.After you insert and activate the CAM, press OPTIONS.
2.Select [Common interface], then press OK.
3.Select the CAM provider, then press OK.