Coustic owner manual XM6 Phase Adjustment

Page 11

XM6 PHASE ADJUSTMENT

An acoustical time delay might exist in a mobile audio system between the time the subwoofer, midrange and tweeter signals are received by the listener. This is caused by different distances between the listening position and the left, right and subwoofer speaker placements.

The overall effect would be either an uneven stereo balance, loss of midrange or midbass, almost no bass or the bass seems to lag behind the highs (commonly known as “out of phase”). If this is the case, experiment with the phase inverter switch for a position that gives you an even stereo balance, more midrange or midbass and more bass output from the subwoofer.

WWW.COUSTIC.COM

music is undefined and may lose low frequesncy response.

music is produced with realism resulting in better imaging and staging

with improved low frequency response.

21

Image 11
Contents Page Welcome Features XM6 Terminals Equalization point between 40Hz 100Hz XM6 Controls & IndicatorsMounting InstallationPreparation LocationSee XM6 Phase Adjustment See XM6 Phase Adjustment Audio Input Connections WiringAudio Output and Power Connections Adjustments XM6 Phase Adjustment XM6 2-/4-/6-CHANNEL 2-/3-WAY Crossover SpecificationsNoise Check Limited Warranty Troubleshooting GuideWarranty Page South 46 STREET, Suite 2020, PHOENIX, AZ