Listening to a Digital Audio Player
Connect a Digital Audio Player to the LINE IN jack
in advance ( page 7).
1 Press .
2 Start playing the Digital Audio Player.
•For details, refer to the instruction manual for the Digital Audio Player.
3 Adjust the volume of the System and the Digital Audio Player.
Bubbles appear when the System detects the sound signal.
Listening to a Digital Audio Player readily (QP Link)
QP Link (Quick Portable Link) automatically switches the source to LINE as the Digital Audio
Player connected to the LINE IN jack ( | page 7) |
starts playback. |
|
Press | . |
|
• Each time you press | , the QP Link setting |
changes as follows:
: Activates the QP Link (initial setting).
: Deactivates the QP Link.
•When the QP Link is activated, the QPLink indicator lights on the display window.
QPLink indicator
■How does the QP Link work?
While the QP Link is activated, starting playback performs the following:
–While listening to another source...
Changes the source to LINE automatically.
–While the System is turned off...
Turns on the System and selects LINE as the source automatically.
NOTE
•When the sound signal from the Digital Audio Player is too weak, QP Link may not function correctly. In this case, turn up the volume of the Digital Audio Player so that the System can detect the sound signal properly.
•Changing from LINE to another source while QP Link is working will deactivate QP Link temporarily. In this case, unplugging the Digital Audio Player from the LINE IN jack reactivates QP Link.
•If you press to turn the System off or if the timer turns the System off while QP Link is working, the System will deactivate QP Link temporarily. In this case, the following reactivates QP Link:
–When the sound signal from the LINE IN jack stops or is too weak for about 30 seconds after the System is turned off.
–When you turn on the System again.
•While QP Link is activated, QP Link may start working when you just connect the Digital Audio Player to the LINE IN jack or unplug it. This is not a malfunction.
Adjusting the Sound Input Level
You can adjust the sound input level from the Digital Audio Player.
1 | Press | . |
|
2 | Hold down | until the input level | |
| appears. |
|
|
•Each time you hold down , the sound input level changes as follows:
:Select this when the sound is too loud with "LEVEL 2" selected. This setting is recommended when connecting an audio device other than a Digital Audio Player to the LINE IN jack.
:Select this when the sound is too loud with "LEVEL 3" selected.
:Select this when listening to a Digital Audio Player (initial setting).
18