Basic Operations and Settings
Adjusting the Tone
NOTE
•Before adjusting, set the sound mode to "SOUND
MODE NORMAL" ( page 9). When the sound mode is set to any item other than "SOUND MODE
NORMAL" and you press , "NO OPERATE"
appears on the display window and you cannot adjust the tone.
1Press repeatedly to display "BASS" or "TREBLE."
: Adjusts the bass sound.
: Adjusts the treble sound.
2 While "BASS" or "TREBLE" is displayed on the display window,
press repeatedly to adjust the tone.
•You can adjust the tone level within the range of
•The display returns to the source display in a few seconds.
NOTE
• This function does not affect recording sound.
αSound
αSound
α(alpha) waves are regarded as one type of
brain wave that is emitted when a person is relaxed. JVC's α SOUND function is designed to produce natural and comfortable sound that makes you feel relaxed. The natural effect is completed by
1)modulation which adds fluctuation with the α wave frequency to subtracted waves
2)sound correction for covering the middle range of waves in music signals which naturally tend to dissipate.
Press repeatedly.
•Each time you press , the display changes as follows:
:Produces a natural
sound.
:Produces a comfortable sound.
: Produces a deeper sound.
: Cancels α sound (initial setting).
•When α sound is set to an item other than
"α SOUND OFF," lights on the display window.
NOTE
•When the SOUND MODE is activated ( page 9), using α SOUND cancels the SOUND MODE automatically and vice versa.
•This function does not affect recording sound.
10