Listening to the Radio
Tuning in to a Radio Station
1 Press or .
Example: When FM is selected as the source
Preset number (right column)
Storing (presetting) Radio Stations
You can store up to 30 FM and 15 AM radio stations.
•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
1 Tune in to a radio station you want to store.
•Refer to "Tuning in to a Radio Station" shown on the left.
STEREO indicator Frequency
2 Press or repeatedly to select a radio station (frequency).
•You can also select a radio station using the automatic tuning. Refer to "Automatic tuning" below.
•When the System receives an FM stereo broadcast, the STEREO indicator lights on the display window.
■Automatic tuning
Hold down or until the frequency starts changing.
When the System receives a broadcast, the frequency automatically stops changing.
To manually stop searching, press or .
■To switch the FM reception (stereo/ monaural)
If the FM station has poor reception, press .
The MONO indicator lights on the display window. Reception will improve though stereo effect is lost.
To restore the stereo effect, press again (MONO indicator goes off).
2 Press .
• The preset number starts flashing for about 5 seconds.
3 While the preset number is flashing, press the number buttons to select the preset number which you want to store the station into.
•Refer to "Using the number buttons" ( page 8).
4 While the selected number is flashing, press .
• "STORED" appears on the display window and the tuned radio station is stored.
NOTE
•The type of FM reception (stereo/monaural) is also
stored ( left column).
•Storing a new station to a used number erases the previously stored station.
Tuning in to a Preset Radio Station
While FM or AM is selected as the source...
Use the number buttons to select the preset number of the radio station you want to tune in to.
Refer to "Using the number buttons" ( page 8).
14