Turning On/Off the System
Press 
.
• While the System is turned off, pressing one of the buttons below also turns on the System.
Remote control:
Main unit:
The corresponding source will be selected by
pressing one of these buttons except 
. Playback automatically starts if the selected source is ready.
Adjusting the Volume
Press 
.
NOTE
•You can also adjust the volume by turning the VOLUME control on the main unit.
•You can adjust the volume within the range of “0” to “40”.
Temporarily Turning Off the Sound (FADE MUTING)
Press 
.
•"FADE MUTING" appears on the display window and the volume will be set to minimum.
•To restore the sound, press 
again.
Emphasizing Bass Sound (AHB PRO)
Press 
.
•Each time you press 
, the AHB PRO (Active Hyper Bass PRO) function changes between "AHB PRO ON" (initial setting) and "AHB PRO OFF."
•When the AHB PRO function is activated, 
lights on the display window.
Sound Mode
Sound mode
A combination of JVC sound technologies enables you to select the desired sound pattern.
Press 
repeatedly.
•Each time you press 
, the display changes as follows:
: For lively sound.
: For energetic sound.
: For soulful sound.
: For vibrant sound.
: Cancels the sound mode (initial setting).
•When the sound mode is set to an item other
than "SOUND MODE NORMAL," 
lights on the display window.
NOTE
•When α SOUND is activated ( 
page 10), using the SOUND MODE cancels α SOUND automatically and vice versa.
•This function does not affect recording sound.
Basic Operations and Settings
9
