Classe Audio CA-D200 owner manual PlayLink, Following CAN-Bus features are model specific

Page 19

AC status

status

name

global brightness

global standby

CAN-Bus model- specific features

PlayLink

The AC status screen displays information from the target unit’s electrical supply sensors. Two screens are available, the second can be accessed by selecting more.

The status screen is the simplest way to access essential information about the target unit. It displays the target unit’s model number, software version, operational status and serial number.

You can set the name that this component will be listed under in the CAN-Bus devices screen. The name will appear next to the unit model and serial number, and facilitate the identification of units in large systems.

By setting all your components to global brightness you can adjust the touchscreen and LED brightness for your entire system by changing the brightness of a single touchscreen. All CAN-Bus software updates automatically set the updated unit to Global Brightness. If you want a particular unit to be excluded from Global Brightness, deselect Global Brightness for that unit.

By setting all your components to global standby you can bring your entire system in and out of standby by pressing the standby button of any unit or remote. All CAN-Bus software updates automatically set the updated unit to global standby. If you want a particular unit to be excluded from global standby, deselect global standby for that unit.

The following CAN-Bus features are model specific.

This feature is exclusive to Delta series disc players and will only function if the disc player is connected to a CAN-Bus enabled preamp or surround sound processor.

When PlayLink is active, pressing play on the disc player will also automatically switch the preamp/processor to a specified input. This means that you can listen to a CD or watch a DVD literally at the touch of a button.

19

Image 19
Contents CA-D200 Two-Channel Amplifier Class Important Safety Instructions Contents Welcome to the Classé family Word about installationUnpacking and Placement Warm up/break-in period Please read this manual… Special Design Features Flashing blue Standby button & LED status indicatorFront Panel On redBalanced XLR Input Rear PanelIR Input and Output Single-Ended RCA InputSpeaker Outputs Classé CAN-Bus Control PortsRS 232 Control Port DC Trigger Input and OutputAC Mains Input RJ-45 DB9 female adaptorRJ-45 USB PortConfigure your amplifier turn-on delay/amp number InstallationMake your preamp/processor connections CAN-Bus will allow a Classé touchscreen to CAN-BusMake your speaker connections Double-check all your connectionsCAN-Bus Terminator SSP-300 & 600 CAN-Bus Interface Box Classé CAN-Bus Equipped ProductsCategory 5 Network Cables CAN-Bus equipped components in your systemFor any system with SSP-300 or SSP-600 Any combination of models in any orderFollowing CAN-Bus features are shared by all models CAN-Bus shared featuresPlayLink Following CAN-Bus features are model specificAmp info Event log Care and Maintenance Protection circuitry has been engaged TroubleshootingNo sound, and Standby LED is not lit No sound, and Standby LED is blinking redRating 15AH AC mains fuse is blownMains voltage 100-120VAC Fuse type Rating 3AH Mains voltage 200-240VAC Fuse typeSpecifications CA-D200 DimensionsPage +1 514 +1 514 636-1428 fax François Cusson Lachine, QuebecNorth America 514