Classe Audio AMP5 owner manual Class

Page 2

NOTICE

All of us at Classé take extreme care to ensure that your purchase will remain a prized investment. We are proud to inform you that all Classé components have been officially approved for the European Community (CE) mark.

This means that your Classé product was subjected to the most rigorous manufacturing and safety tests in the world. The CE mark certifies that your purchase meets or exceeds all European Community requirements for manufacturing consistency and consumer safety.

This equipment has been tested and found to comply with the limits for a

Class

B digital device,

pursuant to Part 15 of the

FCC Rules. Operation is subject to the following two conditions: (1) This

device

may not cause

harmful interference, and (2)

This device must accept any interference received, including interference that may cause undesired operation. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna;

Increase the separation between the equipment and the receiver;

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;

Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

The information contained in the manual is subject to change without notice. The most current version of this manual will be posted on our web site at http://www.classeaudio.com.

Classé marks the “CE” symbol indicating compliance of this device with the EMC (Electromagnetic Compatibility) and LVD (Low Voltage Directive) standards of the European Community.

Classé complies with the European Parliament and Council Directive 2002/96/EC concerning Waste Electrical and Electronic Equipment (WEEE). This product must be appropriately recycled or processed in accordance with these directives. Consult your local waste disposal authority for guidance.

Classé products are designed and manufactured to comply with the Restriction of Hazardous Substances (RoHS) as stated in the European Parliament and Council Directive 2002/95/EC.

2

Image 2
Contents Sigma Series Five-Channel AmplifierClass Important Safety Instructions Contents Word about installation Welcome to the Classé familyUnpacking and Placement Rack-mounting Page Special Design Features On red Standby button & LED status indicatorFront Panel Flashing blueBalanced XLR Input CH2 CH5 OutputsClassé CAN-Bus Control Ports Single-Ended RCA InputSpeaker Outputs IR Input and OutputDC Trigger Input and Output RS-232 Control PortUSB Port RJ-45 DB9 female adaptorRJ-45 AC Mains InputMake your preamp/processor connections InstallationConfigure your amplifier turn-on delay/amp number Make your speaker connections Adjust the global system brightnessCAN-Bus Double-check all your connectionsCAN-Bus equipped components in your system Classé CAN-Bus Equipped ProductsCategory 5 Network Cables CAN-Bus Terminator SSP-300 & 600 CAN-Bus Interface BoxAny combination of models in any order For any system with SSP-300 or SSP-600Operational status and serial number CAN-Bus shared featuresFollowing CAN-Bus features are shared by all models Following CAN-Bus features are model specific Configuration screenAmp info Event log Care and Maintenance No sound, and Standby LED is blinking red TroubleshootingNo sound, and Standby LED is not lit Amplifier keeps shutting offRating 3AH Mains voltage 200-240VAC Fuse type AC mains fuse is blownMains voltage 100-120VAC Fuse type Rating 15AHSpecifications Dimensions Page North America 514 François Cusson Lachine, Quebec+1 514 +1 514 636-1428 fax