Specifications
n | Frequency response | 10Hz – 20kHz, | ||
n | Output power | 200W rms into 8Ω | ||
|
| All channels driven | ||
|
| 400W rms into 4Ω | ||
| Harmonic distortion | Any two channels driven* | ||
n | 0.018% @ 1kHz All channels | |||
| Peak Output Voltage | driven to 1/8th power into 8Ω | ||
n | 116Vpeaktopeak,58Vrmsnoload | |||
| Input impedance | 116V peak to peak, 58V rms into 8Ω | ||
n | 100kΩ Balanced / 50kΩ SE | |||
n | Voltage gain |
| 29 dB | |
n | Input level at clipping | 1.4Vrms Balanced/SE | ||
n | Intermodulation distortion | >80 dB below fundamental | ||
|
|
| into 8Ω SE | |
n | ||||
n | Standby power consumption | Complies with EU Commission | ||
| Rated power consumption | regulation no 801/2013 of Aug 22, 2013 | ||
n | 200W @ 1/8th power into 8Ω | |||
n | Mains voltage | 90V - 264V, 50/60Hz | ||
n | Overall Dimensions | Width: 17.00” (433mm) | ||
| Depth (excluding connectors): 14.57” (370mm) | |||
| Net weight | Height: 3.75” (95mm) | ||
n | 23lb | (10.48 | kg) | |
n | Shipping weight | 30lb | (13.61 | kg) |
*each channel supports 400W output into 4 ohms but the AC Mains/power supply cannot support all channels driven simultaneously at this level, which would require over 2,500W and only occur under a special test condition. Every channel easily drives lower impedance loads.
All tests
For more information, see your Classé dealer, or contact:
B&W Group Ltd.
5070 François Cusson
Lachine, Quebec
Canada H8T 1B3
Telephone | +1 (514) |
FAX | +1 (514) |
Internet: | http://www.classeaudio.com |
email: | cservice@classeaudio.com |
Classé and the Classé logo are trademarks of B&W Group Ltd., Worthing U.K. All rights reserved.
AMX® is a registered trademark of AMX Corporation of Richardson, TX. All rights reserved. Crestron™ is a trademark of Crestron Electronics, Inc. of Rockleigh, NJ. All rights reserved. Control 4™ is a trademark of Control 4 Corporation of Saltlake City UT. All rights reserved.
25