Classe Audio AMP5 owner manual Dimensions

Page 26

AMP5

26

Dimensions

17.00”

(433.00)

17.00”

(433.00)

13.39”

(340.00)

3.45” 3.75” (88.00) (95.00)

2.10”

(53.59)

9.65”

(245.80)

14.57”

(370.00)

14.88”

(378.70)

Image 26
Contents Sigma Series Five-Channel AmplifierClass Important Safety Instructions Contents Word about installation Welcome to the Classé familyUnpacking and Placement Rack-mounting Page Special Design Features On red Standby button & LED status indicatorFront Panel Flashing blueBalanced XLR Input CH2 CH5 OutputsClassé CAN-Bus Control Ports Single-Ended RCA InputSpeaker Outputs IR Input and OutputDC Trigger Input and Output RS-232 Control PortUSB Port RJ-45 DB9 female adaptorRJ-45 AC Mains InputMake your preamp/processor connections InstallationConfigure your amplifier turn-on delay/amp number Make your speaker connections Adjust the global system brightnessCAN-Bus Double-check all your connectionsCAN-Bus equipped components in your system Classé CAN-Bus Equipped ProductsCategory 5 Network Cables CAN-Bus Terminator SSP-300 & 600 CAN-Bus Interface BoxAny combination of models in any order For any system with SSP-300 or SSP-600Operational status and serial number CAN-Bus shared featuresFollowing CAN-Bus features are shared by all models Following CAN-Bus features are model specific Configuration screenAmp info Event log Care and Maintenance No sound, and Standby LED is blinking red TroubleshootingNo sound, and Standby LED is not lit Amplifier keeps shutting offRating 3AH Mains voltage 200-240VAC Fuse type AC mains fuse is blownMains voltage 100-120VAC Fuse type Rating 15AHSpecifications Dimensions Page North America 514 François Cusson Lachine, Quebec+1 514 +1 514 636-1428 fax