Rockford Fosgate PCH-514, PCH-414 manual Crossover Installation, Mounting the Punch Splits Plates

Page 11

Mounting the Punch Splits Plates

1.Cut the proper size hole for the midrange/woofer and tweeter. The midrange/woofer hole should be slightly larger than the mounting plate woofer hole.

2.Place the mounting plate over the mounting holes and mark the location of the screw mounting holes.

3.Remove the ring. Drill the holes for the screws using a 1/8" drill bit.

4.Mount the speaker plate.

Be careful not to bend the mounting plate during this step.

5.Route the wires through the holes.

6Attach the wires and be sure to observe the proper speaker polarity. Keep the speaker wires away from sharp and moving objects.

7.Place the speaker into the hole and snap the speakers into place. Note: Follow Steps 4 & 5 of Flush Mount Tweeter for tweeter.

I

N S T A L L A T I O N

CROSSOVER INSTALLATION

Wiring the PCH-142x

®	®
ACTIVE TWEETER PROTECTION
PCH-142x
®	Striped
	Striped
	Wire
	+
	–
–	+
	+
Output from
Amplifier
	–
• Striped Wire indicates “+” terminal of tweeter

– 8 –

Image 11

Contents PCH-14X Practice Safe Sound B L E O F C O N T E N T S T T I N G S T a R T E DIntroduction Package ContentsPVA Treated Cone Technical Design FeaturesNeodymium Magnets Placing the Punch Splits Speakers Installation ConsiderationsTools Needed T a L L a T I O N Mounting the Midrange S TA L L AT I O NSurface Mounting the Tweeter Flush Mounting the TweeterMounting the Punch Splits Plates Crossover InstallationWiring the PCH-142x Input Protection Wiring the PCH-314Crossover/Tweeter Protection Wiring the TX-4186Vertical Logo Mounting Tweeter Level MatchingHorizontal Logo Mounting TR O U B L E S H O O T I N G Symptom Diagnosis RemedySN OI TA CI FI CE SP Limited WA R R a N T Y in F O R M AT I O N Length of WarrantyPage Montaje del altavoz de medios IntroducciónLugar DE Montaje InstalaciónMontaje superficial del Tweeter Montaje empotrado del TweeterAjuste de Nivel del Tweeter Conectando el PCH-142xMontage du haut-parleur médium Emplacement DE MontageInstallation Montage en surface du tweeter Montage encastré du tweeterBranchement du TX-4186 Branchement du PCH-142xCompensation du Niveau Aigu Montage des Mitteltöners EinleitungEinbauort MontageHochtöner-Aufbaumontage Festschrauben nicht verziehtVerkabelung des TX-4186 Frequenzweiche/Hochton Sicherung Verkabelung des PCH-142xPosizionamento InstallazioneInstallazione del Midrange IntroduzioneInstallazione a superficie del Tweeter Installazione ad incasso del tweeterRegolazione del livello di emissione del tweeter Cablare il PCH-142xPage Made in the USA