Manitowoc Ice S1000M manual Self-Contained Electrical Wiring Connections, For United Kingdom Only

Installation Instructions Section 2

Self-Contained Electrical Wiring Connections

!Warning

These diagrams are not intended to show proper wire routing, wire sizing, disconnects, etc., only the correct wire connections.

All electrical work, including wire routing and grounding, must conform to local, state and national electrical codes.

Though wire nuts are shown in the drawings, the ice machine field wiring connections may use either wire nuts or screw terminals.

SELF CONTAINED ICE MACHINE 115/1/60 OR 208-230/1/60

L1 L1

N=115V

OR

L2=208-230V

GROUNDGROUND

SV1258	ICE MACHINE	TO SEPARATE
	CONNECTIONS	FUSE/BREAKER

SELF CONTAINED ICE MACHINE 208-230/3/60

L1

L2

L3

GROUND

ICE MACHINE

SV1190CONNECTIONS

SELF CONTAINED ICE MACHINE 230/1/50

L1

N

GROUND

ICE MACHINE

CONNECTIONS

SV1191

L1

L2

L3

GROUND

TO SEPARATE

FUSE/BREAKER

L1

N

GROUND

TO SEPARATE

FUSE/BREAKER. DISCONNECT ALL POLES.

For United Kingdom Only

As the colors of the wires in the mains lead of the appliance may not correspond with the colored markings identifying the terminals in your plug, proceed as follows:

•The wire which is colored green and yellow must be connected to the terminal in the plug which is marked with

the letter E or by the earth ground symbol or colored green or green and yellow.

•The wire colored blue must be connected to the terminal which is marked with the letter N or colored black.

•The wire colored brown must be connected to the terminal which is marked with the letter L or colored red.

2-4 Part Number 80-1561-3