Installation Check List, Section | Manitowoc Ice S1000M manual

Installation Check List

Section 2	Installation Instructions

Installation Check List

Is the Ice Machine level?

Has all of the internal packing been removed?

Have all of the electrical and water connections been made?

Has the supply voltage been tested and checked against the rating on the nameplate?

Is there proper clearance around the ice machine for air circulation?

Has the ice machine been installed where ambient temperatures will remain in the range of 35° - 110°F (1.6° - 43.3°C)?

Has the ice machine been installed where the incoming water temperature will remain in the range of 35° - 90°F (1.6° - 32.2°C)?

Is there a separate drain for the water-cooled condenser?

Are the ice machine and bin drains vented?

Are all electrical leads free from contact with refrigeration lines and moving equipment?

Has the owner/operator been instructed regarding maintenance and the use of Manitowoc Cleaner and Sanitizer?

Has the owner/operator completed the warranty registration card?

Has the ice machine and bin been sanitized?

Is the toggle switch set to ice? (The toggle switch is located directly behind the front panel).

Is the ice thickness control set correctly? (Refer to Operational Checks to check/set the correct ice bridge thickness).

Part Number 80-1561-3

2-7

Image 15

Manitowoc Ice S1000M manual Installation Check List, Section, Installation Instructions, Is the Ice Machine level?

Contents

S1000M Model Ice Machines Installation Use and Care Manual Procedural Notices Read These Before ProceedingPERSONAL INJURY POTENTIAL Safety Notices AuCS Automatic Cleaning System Table of Contents continued Section General InformationSection Installation Instructions Manitowoc Cleaner and Sanitizer Guardian Sachet Replacement Frequency Table of Contents continued Section Ice Machine OperationSection Maintenance Section Before Calling For Service General Information How to Read a Model NumberSection General Information Section BIN CASTER AccessoriesMANITOWOC CLEANER AND SANITIZER AUCS AUTOMATIC CLEANING SYSTEM Model/Serial Number Location Model/Serial Number LocationMODEL/SERIAL PLATE LOCATION Service Calls Owner Warranty Registration CardWarranty Coverage AUTHORIZED WARRANTY SERVICE Width, Depth, and Height Dimensions Section Installation InstructionsInstallation Instructions Ice Machine Dimensions Location of Ice Machine Ice Machine Heat of RejectionThe location must be free of airborne and other contaminants MINIMUM CIRCUIT AMPACITY Electrical ServiceVOLTAGE FUSE/CIRCUIT BREAKER SELF CONTAINED ICE MACHINE 208-230/3/60 Self-Contained Electrical Wiring ConnectionsFor United Kingdom Only SELF CONTAINED ICE MACHINE 115/1/60 OR 208-230/1/60 AIR GAP Water Supply and Drain RequirementsCooling Tower Applications Water-Cooled Models WATER SUPPLY Typical Water Supply Drain Installation WATER SUPPLY AND DRAIN LINE SIZING/CONNECTIONSPlumbing must conform to state and local codes Is the Ice Machine level? Installation Check List Potential Personal Injury Situation Before Starting the Ice Machine sv3149 Section Ice Machine OperationIce Machine Operation Component Identification FREEZE SEQUENCE 3. Prechill Sequence Of OperationINITIAL START-UP OR START-UP AFTER AUTOMATIC SHUT-OFF 1. Water Purge 2. Refrigeration System Start-Up AUTOMATIC SHUT-OFF 7. Automatic Shut-Off SAFETY TIMERSHARVEST SEQUENCE 5. Water Purge 6. Harvest Ice Thickness Check Operational ChecksWATER LEVEL ICE THICKNESS CHECK Water Purge Adjustment HARVEST SEQUENCE WATER PURGE45 second setting 0 second setting THIS PAGE INTENTIONALLY LEFT BLANK Ice Machine Inspection Section MaintenanceMaintenance Exterior Cleaning Guardian SACHET INSTALLATION/REPLACEMENT PROCEDUREGuardian Location GUARDIAN SACHET REPLACEMENT FREQUENCY CLEAN UP PROCEDURE FOR DAMAGED SACHET PACKET Interior Cleaning and Sanitizing CLEANING PROCEDUREStep SANITIZING PROCEDURE Refer to Removal of Parts For CleaningRemove all ice from the bin 1 gal. 4 l REMOVAL OF PARTS FOR CLEANING/SANITIZINGCleaner 16 oz 500 ml cleaner Ice Thickness Probe Removal 1. Water CurtainWater Curtain Removal 2. Ice Thickness Probe 3. Water Distribution Tube 4. Water TroughWater Distribution Tube Removal Water Level Probe Water PumpWater Pump Removal COIL SPRING Dump Valve DisassemblyWater Dump Valve PLUNGER SPRING STOP 4-10 Evaporator Tray RemovalDrain Line Check Valve Panel Removal Removing the Front Panel4-11 Water Inlet Valve SELF-CONTAINED WATER-COOLED ICE MACHINES Removal from Service/WinterizationPry Open the Water Regulating Valve AUCS→ Accessory 4-12 Problem Section Before Calling For ServiceBefore Calling For Service Checklist Call for service Safety Limit FeaturePage 2004 Manitowoc Ice, Inc. Litho in U.S.A MANITOWOC ICE, INC