Satellite Position Memory
TO STORE POSITION: Hold down either the Satellite 1 or Satellite 2 button for at least 2.5 seconds. The LCD will show “P1” or “P2” when button is released.
TO RECALL POSITION: Hold down either the Satellite 1 or Satellite 2 button for less than 2.5 seconds. The LCD will show “r1” or “r2”.
TO CANCEL RECALL: Press any arrow button to stop moving to a stored position.
Troubleshooting
If you cannot lock on to the correct satellite, it is most likely that an object is blocking the signal. If this is the case, move the vehicle to have an unobstructed view of the southern sky.
ERROR CODES | PROBLEM | ACTION |
|
|
|
E0 | Remote is unable | ss 4URNNREMOTE /&& WAITIT |
| to send commands | SECONDSOANDDTURNNBACKK/. |
| to antenna | ss |
|
| |
|
| TURNEDE/. |
|
| ss |
|
| is attached to receiver |
|
| ss |
|
|
|
E1 | Remote is unable | Move remote closer to antenna |
| to receive response |
|
| from antenna |
|
|
|
|
E2 | Miscommunication | Call Wallace Technologies @ |
| between remote | |
| and antenna |
|
|
|
|
Vu Qube | 11 |