Orion Car Audio XTR62, XTR52 owner manual Door Mounting, Rear Deck Mounting

Page 4

the location you have chosen will not affect any of the mechanical or electrical operations of the vehicle.

Determining the best location for the speakers will depend on your cosmetic needs and your vehicle's interior. If minimal intrusion in your vehicle is desired, factory speaker locations may be the ticket for you. Placing the speaker in the factory location can often give very desirable results.

DOOR MOUNTING

When checking for possible speaker locations in the doors, check the operation of the window and all assemblies. There is also a stabilizer stop bar in between the door and the door jamb. This bar prevents the door from opening too far. Many shade tree installers overlook this and check for clearance only when the door is fully open.

Figure 1

Figura 1

Abbildung 1

Inside

Dampening Mat

of Door

 

Speaker

 

cut out

Speaker installed

 

with no gaps

 

or air leaks

 

 

Grille

 

Screws

 

Door

 

Panel

Dampening on

 

top of outer

 

door skin

 

REAR DECK MOUNTING

In rear deck installations, check the operation of the trunk suspension springs or tension bars. These tension bars move in the opening and closing of the trunk. You cannot be too cautious during this part of the installation, In addition, do not locate the speakers too close to the back of the rear deck. Installing the far screws will only be possible with the removal of the rear window.

Rear Seat

Rear/Trunk

 

of Car

Figure 2

Figura 2

Abbildung 2

© 2008 directed electronics—all rights reserved

3

Image 4
Contents Component Speaker Introduction Table of ContentsPractice Safe Sound Installation WHAT’S in the BOXTools of the Trade Finding Speaker Mounting LocationsDoor Mounting Rear Deck MountingInstalling the MID/WOOFERS Surface Mounting Installing the TweeterFull Flush Mounting Installing the Crossover Tweeter Level ControlsWiring Diagram Features SpecificationsXTR52 XTR62 Installation DES HAUT-PARLEURS Médiaux ET DE Graves FrançaisOÙ Monter LES HAUT-PARLEURS Montage SUR UNE PortièreMontage EN Surface Installation DU HAUT-PARLEUR DaigusMontage Encastré Installation DU Répartiteur Réglage DU Niveau DE HAUT-PARLEURS D’AIGUSSpécifications CaractéristiquesEspañol Ubicaciones DE Montaje DE LOS AltavocesMontaje EN LA Puerta Montaje EN LA Repisa TraseraMontaje EN Superficie Instalación DEL TweeterMontaje AL RAS Instalación DEL Crossover Controles DE Nivel DE TweeterEspecificaciones CaracterísticasDirected electronics-Reservados todos los derechos Deutsch SO Platzieren SIE DIE LautsprecherTüreinbau Einbau IM KofferraumOberflächeneinbau Einbau DES HochtönersBündiger Einbau Installation DER CROSSOVER-EINHEIT HOCHTÖNER-PEGELREGELUNGDaten EigenschaftenDirected electronics-Alle Rechte vorbehalten Installazione DEI MIDRANGE/WOOFER ItalianoMontaggio Sulle Portiere Montaggio NEL Piano Portaoggetti PosterioreMontaggio a Superficie Installazione DEL TweeterMontaggio a Filo Installazione DEL Crossover Comandi DEL Livello DEL TweeterDati Tecnici CaratteristicheDirected electronics-tutti i diritti riservati Português Determinação DOS Locais Para Instalação DOS ALTOS-FALANTESInstalação NAS Portas Instalação no Painel TraseiroInstalação NA Superfície Instalação do TweeterInstalação Embutida Instalação do Crossover Controles DE Volume do TweeterEspecificações Directed electronics-Todos os direitos reservados Warranty