Orion Car Audio manual Specifications, Amplifier Section HP-2800 HP-4800

SPECIFICATIONS

Amplifier Section	HP-2800	HP-4800
Power Output 4W	125 x 2	65 x 4
(Watts)1
Power Output 2W	200 x 2	100 x 4
(Watts)2
Power Output 4W	400 x 1	200 x 2
(Watts) Bridged
Amplifier	> 50% into 2W load	> 50% into 2W load
Efficiency	at max. power	at max. power
Remote Bass	yes (HP-RB1	yes (HP-RB1
Function	optional)	optional)
Distortion at	< 1.0% THD+N	< 1.0% THD+N
Rated Power
Frequency	20Hz to 20kHz	20Hz to 20kHz
Response	±0.25dB	±0.25dB
Linear Bandwidth	10Hz to 100kHz	10Hz to 100kHz
	±3dB	±3dB
Damping Factor	> 200	> 200
Input Sensitivity	150mV to 5V rms	250mV to 5V rms
Supply Voltage	9 to 16V	9 to 16V
Range
	thermal, DC offset,	thermal, DC offset,
	reverse polarity,	reverse polarity,
Protection	short protection,	short protection,
	under-voltage,	under-voltage,
	over-voltage	over-voltage
	Power 4 AWG,	Power 4 AWG,
Terminal Wire	Remote 12 AWG,	Remote 12 AWG,
Gauge	Ground 4 AWG,	Ground 4 AWG,
	Speaker 12 AWG	Speaker 12 AWG
Input Impedance	20kW	20kW
Fuse Type	(2) 30 Amp	(2) 30 Amp
Dimensions	13.5"x10.25 x 2.4"	13.5"x10.25 x 2.4"
Weight	8.4 lbs.	9 lbs.
	Crossover Section
High Pass	Continuously	Continuously
Crossover	variable (50-500Hz)	variable (50-500Hz)
Low Pass	Continuously	Continuously
Crossover	variable (50-500Hz)	variable (50-500Hz)
Intelli-Q	yes	yes (channels 3/4)
Intelli-Bass	n/a	yes (channels 1/2)

1.Continuous 4W load 20Hz to 20kHz, < 1% THD, with input voltage at 14.4VDC.

2.Continuous 2W load 20Hz to 20kHz, < 1% THD, with input voltage at 14.4VDC.

8 © 2005 Directed Electronics, all rights reserved