Orion Car Audio HP-2800 Practice Safe Sound, Record Your Serial Number and Date, HP2800 Controls

PRACTICE SAFE SOUND™

Continuous exposure to sound pressure levels over 100dB may cause permanent hearing loss. High power automotive sound systems can generate sound pressure levels in excess of 130dB. When playing your system at high levels, please use hearing protection and avoid long term exposure.

RECORD YOUR SERIAL NUMBER AND DATE

To ensure your warranty (see back cover), please record the following information regard- ing your new amplifier.

Model:	__________________________________________________
Serial Number:	__________________________________________________
Date of Purchase:	__________________________________________________
Purchased from:	__________________________________________________

END PANEL LAYOUTS

HP2800 Controls

1 2 3 4 5 6 7 8 9 10 11

HI INPUT INPUT LINE OUT

POWER

(GREEN) ESP PORT

L CH L CH GAIN REMOTE LPF X-OVER HPF INTELLI-Q

PROTECT

(RED)

LPF FLAT HPF

MIN MAX 50Hz 500Hz 50Hz 500Hz MIN MAX

ESP

INDICATOR (YELLOW)

R CH R CH

1.Hi Input (high level input) - Accepts 1v to 10v input from the head unit’s speaker output. The amplifier will automatically wake-up when the input is greater than 1V.

2.RCA Input - accepts RCA input from a head unit, preamplifier, or equalizer.

3.RCA Line Output - provides easy connection to additional amplifiers.

4.Gain Control - continuous adjustment for full power output.

5.Remote Bass Jack - connects optional HP-RB1 remote bass control to control the bass level from the driver’s seat. This control is only active when the crossover switch is at the LPF setting.

6.LPF (Low-Pass Frequency Control) - adjusts the frequency (50Hz–500Hz) of the upper crossover frequency. When set for this position the optional remote bass control is active.

7.X-Over(cross-over) - activates LPF (low pass crossover), FLAT (all pass), or HPF (high pass crossover).

8.HPF (High-Pass Frequency Control) - adjusts the frequency (50Hz–500Hz) of the lower crossover frequency.

9.INTELLI-Q Control - continuously adjusts the "Q" boost of the high-pass crossover.

© 2005 Directed Electronics, all rights reserved 3