Technical Design Features

1.Power LED - when lit indicates that the amplifier is on

2.Front Output Configuration Switch - determines the output configuration of the amplifier

3.Front Gain Control - continuously adjusts from 200mV to 5Vrms for full power output

4.2-Channel / 4-Channel Switch - configures the amplifier for two or four RCA inputs

5.Front RCA inputs - accepts RCA input from a source unit, preamplifier or equalizer

6.Rear RCA outputs - accepts RCA input from a source unit, preampli- fier or equalizer

7.Rear Crossover Control - adjusts the frequency for the rear channels

8.Rear Crossover Switch - configures the rear channel for high-pass, low-pass or full range operation

9.Rear Output Configuration Switch - determines the output configuration fo the amplifier

10.Front Crossover Switch - configures the front channel for high- pass, low-pass or full range operation

11.Front Crossover Control - adjusts the frequency for the front channels

12.Rear Gain Control - continuously adjusts from 200mV to 5Vrms for full power output

13.REM Remote Turn-on Input - turns on the amplifier when fed 12 V+

14.Speaker Connections - allow up to 12 gauge speaker wire

15.Fuse - protects the amplifier from over current situations

16.Power Connections - allow up to 4 gauge power and ground cables

page 9