Orion Car Audio 200 owner manual Amplifier

Page 13

SYSTEM PLANNING

System 2 adds a subwoofer to system 1. Amplifier 1 is configured high-pas for the satellite speakers and Amplifier 2 is configured low-pass for a single 4Ω sub- woofer.

Amplifier 1

SYSTEM 2

• Lowest recommended impedance is 2Ω

 

per channel

Amplifier is configured high-pass for

 

satellite operation

Amplifier is configured for stereo op-

+

+

 

+

+

 

 

eration

Amplifier 2

Lowest recommended impedance is 4Ω per channel

Amplifier is configured for low-pass for subwoofer operation

Amplifier is configured for summed bridged operation

+

 

 

+

 

 

 

 

 

 

+

page 11

Image 13
Contents Xtreme 200/400.4 Table of Contents T R O D U C T I O N Practice Safe Sound About this ManualRecord Your Serial Number and Date WHAT’S in the BOX Warranty Page Xtreme SpecificationsCrossover Xtreme Technical Design FeaturesTechnical Design Features System System PlanningAmplifier System Planning System Planning System Planning Amplifier System Planning System Planning Tools of the Trade InstallationPower Connections Speaker Connections Channel Stereo ConfigurationSingle Bridged Configuration TRI-MODE 3-CHANNEL Configuration Channel Stereo Configuration Channel STEREO/BRIDGED Configuration TWO-CHANNEL Bridged Configuration TRI-MODE 6-CHANNEL Configuration Output Configurations Internal Crossover Configuration Channel Amplifier Input ConfigurationsFine Tuning the Crossover Signal Input and Output Level ControlsPassenger Compartment Choosing Mounting LocationsGeneral Precautions and Installation Tips Step by Step Installation Testing the System Adjusting the Sound of the System Page Symptom Probable Cause Action to Take Troubleshooting TipsPage Quick Check for Troubleshooting CAR Audio Systems Autosound 2000 Troubleshooting TipsAutosound 2000 1-2-3 Method of Logical Troubleshooting Time for Processors Summation Page High Performance CAR Audio