Orion Car Audio 200 owner manual Signal Input and Output Level Controls, Fine Tuning the Crossover

When the switch is in the right position, the crossover is configured for low-pass operation. XTREME amplifiers have a fixed frequency crossover set to 100Hz at 12dB/octave.

FINE TUNING THE CROSSOVER

2,500Hz	The crossover section is marked at four frequency points for ease of system adjustment. These points
	are 45Hz, 175Hz, 600Hz and 5,000Hz. Specific crossover points can be chosen based on the recom-
	mended operational bandwidth of your speakers.

3,500Hz

85Hz

There are three small dots on the frequency range dial. These dots represent commonly used ORION crossover frequencies. These crossover frequencies are 85Hz, 2,500Hz and 3,500Hz respectively.

SIGNAL INPUT AND OUTPUT LEVEL CONTROLS

XTREME amplifiers have separate front and rear level adjustments. The input sensitivity of these adjustments range from 200mv up to 5Vrms on the RCA inputs. This allows easy integration from any source unit either with RCA outputs or speaker outputs. Refer to the Testing the System and the Adjusting the Sound of the System sections for detailed instructions on setting up the level controls.

page 29