Palsonic PDP4250 owner manual Select input source signal, Selecting a Menu language

Basic Operations (continued)

Select input source signal

1 Press the SOURCE button to access source menu.

2 Press VOL+ or VOL- to select a desired input channel.

3 Press ENTER to confirm and the unit display signal from the selected input channel.

source

A D C1 C2 AV TV

VGA

A--------	VGA, select signal from VGA (5-pin D-sub) terminals.
D--------	DVI, select signal from DVI terminals.
C1------	YCbCr1, select signal from YCbCr1 terminals.
C2------	YCbCr2, select signal from YCbCr2 terminals.
AV------	VIDEO (S-VIDEO), select signal from S-Video or Video terminal.
	The S-Video is prior to Video terminal when they are connected at the same time.
TV------	Select TV signal.

Note:

This unit identifies the type of component video terminals automatically. If you connect Y, Cb, Cr terminals, the screen displays YCbCr detected on the bottom-right corner. Similarly, if the component video terminals are Y, Pb, Pr, the screen displays YPbPr detected on the bottom-right corner.

Selecting a MENU language

1

2

3

4

Press MENU to display the menu main page.

Press VOL+/- to display settings menu page.

Press CH to select language item.

Press VOL+/- to select an OSD language.

settings
menu background	opaque
language	English
video format	AUTO
audio format	BG
right/left to change language

Note:

In some models, there may be only one menu language available. In this case, the menu language may not be adjusted by the user.

22