Orion Car Audio 200 owner manual System Planning

SYSTEM PLANNING SYSTEM 3

System 3 uses a 4-channel amplifier to drive an entire system. The front channels are configured high-pass operation for satellites. The rear channels are configured low-pass for two dual voice coil subwoofers.

•Lowest recommended impedance for front channels is 2Ω per channel

•Front channels configured for high-pass operation

•Front channels configured for stereo operation

•Lowest recommended for rear channels is 2Ω per channel

•Rear channels configured for low-pass operation

•Rear channels configured for summed stereo operation

•Amplifier can be configured either for 2-channel or four-channel inputs

Note: when the amplifier is configured for 4-channel input the fader on the source unit can control the output level between the subwoofer and satellites.

page 13