9.Rear X-Over Freq
Select the rear crossover frequency here. The detented control moves clockwise from 20Hz to 5kHz.
10.Rear Gain Control
Use this control to match the output level of the head unit to the amplifier.
11.Subwoofer X-Over Freq
Select the subwoofer crossover frequency here. The detented control moves clockwise from 20Hz to 500Hz.
12.Subwoofer QBASS™ Control
Select the desired boost by turning the dial clockwise form
13.Subwoofer Gain Control
Use this control to match the output level of the head unit to the amplifier.
14.Front X-Over Switch
Select the desired crossover setting, FULL/HPF/LPF for the front speaker outputs.
15.Rear Input X-Over Switch
Select the desired crossover setting, FULL/HPF/LPF for the input
signal to the rear channel when using internal signal path vs. RCA input.
16.Rear Input Internal/External Switch
Select “INT” position if you want to use the internal signal path from the front crossover for the rear input, or the “EXT” position to use the rear RCA input.
17.Rear X-Over Switch
Select the desired crossover setting FULL/HPF/LPF for the rear speaker output.
18.Sub Input X-Over Switch
Select the desired crossover setting, FULL/HPF/LPF for the output signal of the rear channel when using internal signal path vs. RCA input.
19.Sub Input Internal/External Switch
Select “INT” position if you want to use the internal signal path from the rear crossover for the sub input, or the “EXT” position to use the external sub RCA input.
20.Sub X-Over Switch
Select the desired crossover setting, FULL/HPF/LPF for the RCA output.
11