Micro Innovations M000174-19 manual Owner Owner, NET Setup Netsetup

System settings Windows CE

4.8OWNER (OWNER)

This program is used for specifying the user, password and domain for logging into an external Windows→ server/PC. The default setting is the user name MI_PANEL and no password.

Specific operations must be carried out in order for the selected settings to be retained after a restart. If the entries are acknowledged with OK, the current settings can be saved inside the registry file \NETWORK.REG. The content of the REG file must be inserted in the Autoexec.reg file so that the settings are reset after a restart.

See also chapter Autoexec.reg, File .REG and Ethernet

Note:

These entries are only required if the device is to be connected to a Windows→ Server/PC with the

Windows→ operating system. This requires the appropriate user rights, directory or printer authorizations on the server/PC.

4.9NET SETUP (NETSETUP)

The network name can be set using the Netsetup.exe program. The command line call is as follows:

Parameter

Description

-n [Name]	Network name
-default	Sets the default network name consisting of 'MI_' and the last 6 digits of the
	MAC address
-r	Device is restarted immediately if the settings are modified.
-? or –h	Display of the possible parameters

The currently set network name is displayed during the startup (see Startup behavior) and inside the System properties on the Device tab.

32 M000174-19