Windows CE | Ethernet |
2ETHERNET
The Ethernet interface is implemented in compliance with the IEEE 802.3
The cables of the Ethernet interface must be laid separately from the
2.1ACCESS TO PC
Network name
Each panel is given a unique network name in order to avoid conflicts within a network. When the panel is started, the name is displayed together with its relevant IP address. A device name must only occur once in the same network.
Caution:
With Windows CE it is only possible to access external resources (drives/directories/printers) via names and not via IP addresses. Further information is provided in chapters Name resolution in Windows networks, Network access procedure and Network test.
User name / Password / Domain:
The MICRO PANEL has the following default settings:
User name: | MI_PANEL |
Password: | No password defined |
Domain: | No domain defined |
The settings can be modified with the Owner program.
Note:
The user name and password must always be given to access a PC!
Examples of external access:
Direct access to the computer resources is possible or via the local directory \Network\«EnableName». All computer resources associated with the net use command are listed in the directory \NETWORK of the MICRO PANEL. The use of the net use command is described in chapter Network access procedure.
Direct access to computer resource: | Examples: |
\\«Network name of the computer»\«Printer name» | |
\\«Network name of the computer»\«Directory» | |
Access via «connected» resources |
|
\Network\«mapped printer name» | \Network\HP6940 |
\Network\«mapped directory name» | \Network\pc001 |
The name of the computer must be specified under «Network name of the computer». IP addresses are not supported here. Enter the name of the enabled printer under «Printer name».
15 |