Micro Innovations M000174-19 manual Bootdevice Setup Bootdevice

System settings Windows CE

4.13BOOTDEVICE SETUP (BOOTDEVICE)

Note:

The BootDevice setup is only available on XV100 devices.

BootDevice Setup is used to specify the medium from which the panel is to start. The relevant selection options are displayed according to the features of the panel.

4.13.1COMMAND LINE PARAMETERS

The following parameters are supported:

Parameter	Description
-device <boot device type>	1: Start of InternalStorage
	2: Start of StorageCard
	3: Start of USBStorage
-state	Displays the current status
-r	Restarts the panel after the settings are made. This option only functions
	if a setting was changed.

4.13.2FIRMWARE OS

The internal firmware OS is started if the CTRL/DOWNLOAD button is held down for approx. 3 seconds while the device is powered up. Only the most important functions can therefore be run in order to make the device operational again.

4.13.3UPDATE OF THE OPERATING SYSTEM

In order to install a new operating system on the device, the appropriate BIN file must be copied to the folder \<BootDeviceName>\OS\. When the panel is restarted, the BIN file is detected and automatically installed.

38 M000174-19