Sanyo DV-S100 manual Installation, Procedure for installation on carpet Horizontal position

Page 41

Wiring (3)

Other connection (Example 2)

Installation (1)

Procedure for installation on carpet (Horizontal position)

Adding a digital amplifier or an amplifier with Dolby digital decoder.

Notes:

¡Read the manuals supplied with the digital amplifier or the amplifier with Dolby digital decoder as well as this manual.

¡When you add an amplifier with Dolby digital decoder, select “Bitstream” in “Digital Output” on the Setup. zSee page 29,“Changing the Digital Output”.

Monitor with Video input jack Monitor with Video input jack

If not long enough, use the extension cable included.

Yellow

To video input

 

(Front)

To video input

(Yellow)

 

 

(Yellow)

Yellow

 

 

(Rear)

* You can add a monitor for rear seats.

 

1

¡Confirm that the built-in anti- vibration boards on both the left and right sides are set to the horizontal installation position “H”.

¡Attach Small bracket (L) and Small bracket (R) to the changer using the hexagonal bolts (M5 x 8).

¡Attach Small brackets (L) and

(R) to their respective brackets (B) using the hexagonal bolts (M6 x 20) and the hexagonal nuts (M6).

H 45°

V

H 45° V

Built-in anti-vibration

H

 

board position

45°

H

V

45°

V

 

 

Hexagonal bolts (M6 x 20)

Hexagonal bolts

(M5 x 8)

 

Red

R

 

 

 

 

Changer unit

White

Not used.

 

 

 

 

L

 

 

 

 

 

 

 

Attached

 

 

 

Remote control

 

 

 

sensor

 

 

Commercially

 

 

 

available optical

To digital

Bright green

 

cable

audio input Digital amplifier/

 

 

Amplifier with Dolby

 

 

 

 

 

Attached FM

digital decoder

 

Attached DIN

 

 

modulator

 

 

cable (8 pin, 5 m)

 

Not used.

 

 

 

 

 

 

Not used.

2

¡Pull back the carpet and determine where to attach the changer.

¡Stick the supplied double-sided tape to the bottom of the brackets

(B) and peel off the paper backing. ¡Affix the changer to the floor by

pressing in place.

3

¡Remove the hexagonal nuts and take off the changer.

 

 

+12 volt Accessory/Switched (red)

 

 

Connect to where the power is

 

 

supplied when the ACC power or

 

 

ignition switch is turned ON.

 

Fuse 5A

+12 volt Constant (yellow)

 

Connect this lead to the cable to

 

 

 

 

which power is continuously supplied

 

 

and which has been passed through

 

 

the car’s fuse unit.

 

 

Ground (black)

 

 

Screw this to a metal part of the

Attached parking brake cable

 

car.

Connect to car’s parking brake line.

Bright green

*If a fuse becomes blown, replace it with a fuse with the correct rated capacity. zSee page 38, “ Replacing the fuses ”.

4

¡Using a knife, cut “X”s in the carpet

5

¡Once more, use the hexagonal nuts

 

 

 

directly above the brackets (B)

 

to attach the changer on top of the

 

 

 

bolts.

 

carpet.

¡Return the carpet to its original position allowing the bolts to stick

through.

40

Page 40 Page 42
Image 41
Page 40 Page 42
Contents DV-S100 Function available with a video CD IntroductionMacrovision Dolby DigitalContents Installing the magazine Precautions for handling discs How to use the magazineLoading a disc With new discsInstallation parts for Changer unit AccessoriesFor safe driving For safe and efficient operationPlayable discs Setting up for operation Before using the system Power OnPower On and Play When the changer is connected directly to Sanyo CD orHow to load the batteries Remote controlRange of remote control operation Audio CD Operation ScreenName & functions of each part Pausing Freezing Switching OffStopping Play To Stop PlayAdvancing / Returning to a Chapter or Track Selecting a DiscPress a disc select button or During play, press a skip button orFast Playback Using the Title MenuDVD and Video CD Audio CDUsing PBC Playback Using DVD MenusFunction operates. zSee To Stop Play Stopping PBC Playback and Beginning Normal PlayAt the upper right of the screen appears ZSee step Stopping PBC Playback and Beginning Normal PlayUsing Slow Play Using Frame Advance Play and Slow PlayUsing Frame Advance Play While play information is displayed, use the search button During play, press the search buttonTime of title, track number, elapsed time of track Press the enter buttonVideo CD Switching the Audio LanguageSwitching the Audio Output Method Switching the Angle Switching the Subtitle LanguageCreating a Program List ZSee Using Scan Play, Random Play, and Program Play on thisZSee Creating a Program List on this Program list creation screen appearsPress Input number display shows Indicator on the operation screenPress Input number display shows 2 next to Lights ZSee page 8, Audio CD Operation ScreenDuring play, press the repeat button Using Repeat PlayVideo CD, Audio CD Using A-B Repeat Play Mode Press the list button Displaying a Disc ListPress the A-B repeat button Press the list button or the return button Displaying a Disc List Displaying Running TimePress the time button Press the enter button . The selected disc is playedPress the stop button To stop play Press the setup button Switching the Type of Running Time DisplayChange the settings Press the time button during play or while pausedChanging the DVD Menu Language DVD menu language setup screen is displayedPress the return button or the left cursor button Press the play button . Play beginsYou can change the DVD audio language Audio language setup screen is displayedChanging the Audio Language Subtitle Language and press the enter button Subtitle language setup screen is displayedChanging the Subtitle Language Changing the Digital Output Subtitle language or Off when hiding subtitles and pressUse the up/down cursor buttons , to select a preferred Enter buttonOutput LPCM/Bitstream and press the enter button Use the up/down cursor buttons , to select the audioLetter Box Pan & ScanPassword registration screen is displayed Changing Parental SettingsWhen using this unit for the first time Number Press the enter button Password re-entry screen is displayedChanging the parental level PasswordUse the up/down cursor buttons , to select a level Use the number buttons to enter the registeredChanging the password OSD Message setup screen is displayed Switching Between OSD Message Display and Non-DisplayChanging the Player Language Player Language setup screen is displayedInstallation and Wiring Precautions Before wiring and installationTransport Lock Screws Position of the built-in anti-vibration boardsBasic connection WiringInterference on 88.9 MHz Replacing the fusesOther connection Example When your car stereo has RCA line-in terminalsProcedure for installation on carpet Horizontal position InstallationBuilt-in anti-vibration Installation of FM modulator Message displays TroubleshootingFast forward, fast reverse, frame Dimensions W x H x D Approx x 26 x 45 mm Weight Approx g Specifications¡Changer ¡FM modulatorPage 2RR6P10A06700
Top Page Image Contents