Sanyo DV-S100 Press Input number display shows 2 next to, Indicator on the operation screen

Creating a Program List (2)

Note:

4

Press the enter button (

).

Perform input number display /

Last Clear

/

All Clear

procedures as

follows.

* The program list displays “12”.

CD

• For input number display

CD

[\

Last Clear

..

• For

Last Clear

[\

All Clear

...................

12

A-

B

• For input number display

.........

SC

AN

[

All Clear

RANDOM

• For input number display

,

:Play(Program Play)

Direction:Move Cursor

\

All Clear

CLEAR:Track No.Clear

0~9:Track No.PROGRAMInput

Input number display \

ENTER:CFMD

Last Clear

\

All Clear

3 Input track numbers with the number buttons ( - ).

Example To input “12”

qPress ( ).

The input number display shows “1”.

1	2	3	8	10
	Track Program
			Last Clear
		– 1	All Clear

wPress ( ).

The input number display shows “2” next to “1”.

1	2	3	8	10
	Track Program
			Last Clear
		1 2	All Clear

Note:

If you enter an incorrect number, continue by simply entering the correct number.

Example: When “10” was input instead of ‘12’, input ‘12’.

Example: When “12” was input instead of ‘08’, input ‘08’. * The input number display will show “– 8”.

5
	Repeat steps	3	and	4	to store track numbers in the desired
	order of play (up		to 20 numbers can be stored).
6	When storage is complete, press the play button (						).
	Tracks are played in the order stored in the program list.
	During program play, the			PROGRAM		indicator on the operation screen
	lights.
	zSee page 8, “Audio CD Operation Screen”.
	When the last track in the program list ends, the unit stops (							).

Notes:

¡To interrupt program list creation, press the return button ( ). The display will

return to the operation screen. After that press the play button ( ) to continue the playback from where it was interrupted.

¡Track numbers not recorded on a disc cannot be stored.

¡You can use the up/down cursor buttons ( , ) to input track numbers in step

3. When the button is pressed the numbers in the input number dispaly will increase or decrease accordingly.

¡The contents stored in a program list will be cleared when the following occur.

•Power to the unit is disconnected

•A magazine is ejected

•A different disc in a magazine is selected.

20