Sharp PN-Y475 VOLM0030, VOLM0020 ←, OK 002 IDLK0000 ← Wait ← OK 002 ← VOLM0010 OK 001 ←, 004

Page 34

Controlling the Monitor with a PC (RS-232C)

nCommands for ID control

The command examples shown on this page assume the following connection and ID SETTING.

ID number: 1 ID number: 2 ID number: 3 ID number: 4

IDST .........A monitor receiving this command sets its own ID

number in the parameter field. Example:

IDST0001

OK 001 ← The ID number of this monitor is set to 1.

IDLK ........The parameter of this command sets the ID

number of the monitor. The monitor is subject to all subsequent commands.

Example:

IDLK0002

Following commands are for the monitor

 

 

 

with ID number: 2.

WAIT

 

Searching for monitor with ID number:

 

 

 

2

OK

002

Found monitor with ID number: 2

VOLM0030

Sets volume of monitor with ID

 

 

 

number: 2 to 30.*

WAIT

 

Processing

OK

002

 

 

TIPS

You can automatically assign ID numbers by using the IDST command with the Repeater control (see “Repeater control” on page 35).

For example, using the command “IDST001+” automatically sets the ID numbers, as shown below.

[Example]

ID number: 1 ID number: 2 ID number: 3 ID number: 4

VOLM0020 ←

WAIT

OK 002 IDLK0000 ←

WAIT ← OK 002 ← VOLM0010

OK 001 ←

Sets volume of monitor with ID number: 2 to 20.*

Canceling fixed ID number setting

Canceling IDLK

Cancelation complete

The volume of the monitor with ID number: 1 (the one directly connected to the PC) is set to 10. (IDLK is canceled.)

IDST001 +

ID setting command with repeater control

WAIT

*The IDLK command remains effective until it is canceled, or power is shut off.

OK

001

“OK” response from ID number: 1

OK

002

“OK” response from ID number: 2

OK

003

“OK” response from ID number: 3

OK

004

“OK” response from ID number: 4 (End)

IDSL ........The parameter of this command sets the ID number

of the monitor. The monitor is subject to the next command.

Example:

IDSL0002

The next command is for the monitor

 

 

 

with ID number: 2.

WAIT

 

Searching for monitor with ID number:

 

 

 

2

OK

002

Found monitor with ID number: 2

VOLM0030

Sets volume of monitor with ID

 

 

 

number: 2 to 30.

WAIT

 

Processing

OK

002

OK response from monitor with ID

 

 

 

number: 2

VOLM0020

Sets volume to 20.

OK

001

 

The volume of the monitor with ID

number: 1 (the one directly connected

to the PC) is set to 20.*

*The IDSL command is effective only once, for the immediately succeeding command.

E34

Image 34
Contents PN-Y555 PN-Y475 PN-Y425 Page Blue For Customers in U.KGREEN-AND-YELLOW BrownDear Sharp Customer Safety Precautions Safety Precautions Tips and Safety Instructions For the monitor in portrait orientation For the monitor in landscape orientationDo not place the monitor on a device which generates heat Contents Supplied ComponentsPart Names LCD panel Remote control sensor SeeSub input terminal See 11 E NRemote control unit Part NamesSignal transmitter Return button See SIZE/Yellow button SeeConnecting Peripheral Equipment Connecting Peripheral Equipment 13 EAttachment Connecting the Power CordBinding Cables PN-Y42515 E Setting the USB flash drive coverAffixing the Stand Hole Protection Covers USB port USB flash drive cover screwInstalling the batteries Preparing the Remote Control UnitRemote control operation range Turning on the main power Turning Power On/OffTurning power on/off 17 ENDate/time setting Turning Power On/Off NOperation modeSetting of the Setup menu. Be sure to set the date and time Basic Operation 19 ENormal Wide Basic Operation NSwitching the screen sizeDot by Dot Auto playback Playing the Files in a USB Flash Drive21 E Playing filesMovie Playing files using the Schedule functionPhoto Music23 E SettingsOperations during play Volume Playing the Files in a USB Flash Drive Settings during playColor Mode SizeDisplaying the menu screen Menu Items25 E NExample of operationNSCREEN Menu item detailsMenu Items NPICTURE27 E NSETUPMenu Items NAUDIO Scan Mode Hdmiav Standby ModePower on Delay Adjustment Lock29 E Setting procedureSet using Multi in the Setup menu Menu Items NEnlargeMenu Items NSCHEDULE 31 E Menu Items NScreen display for adjustmentOpening the adjustment pattern ScheduleCommunication conditions Communication procedureControlling the Monitor with a PC RS-232C PC connection33 E NID SettingNResponse code format VOLM0020 ← 002VOLM0030 OK 002 IDLK0000 ← Wait ← OK 002 ← VOLM0010 OK 001 ←35 E NRepeater control commandVolume settings for all monitors are returned Controlling the Monitor with a PC RS-232C NRepeater controlControlling the Monitor with a PC RS-232C RS-232C command tablePower control/Input mode selection Screen menu37 E Controlling the Monitor with a PC RS-232C Setup menuOthers To set on the monitor Settings to connect to a LANControlling the Monitor with a PC LAN Character input39 E Command-based controlControlling the Monitor with a PC LAN Troubleshooting Power LED is flashing in red and green alternately Troubleshooting41 E Specifications NProduct SpecificationsSpecifications NDimensional Drawings43 E Dmpm Digital Monitor Power Management Specifications NPower managementNDDC plug and play 45 E Specifications NCompatible signal timing PCNCompatible signal timing AV DVI-D HdmiND-sub input terminal pins Specifications NDVI-D input terminal pinsNHDMI input terminal pins NRS-232C input terminal pinsSpecifications NRS-232C output terminal pins NDVI-D output terminal pins47 E Mounting Precautions For Sharp dealers and service engineers PN-Y555-Y475-Y425 Me EN14G2

PN-Y425, PN-Y475, PN-Y555 specifications

The Sharp PN-Y475, PN-Y555, and PN-Y425 are part of Sharp's range of professional displays designed to meet the demands of contemporary business and educational environments. These displays boast impressive features and advanced technologies, making them ideal for various applications, including digital signage, presentations, and collaborative work.

One of the standout features across this series is their superior image quality. The displays utilize full HD (1920 x 1080) resolution, ensuring that images, videos, and text are sharp and vibrant. The PN-Y555, with its 55-inch screen size, is perfect for medium to large meeting rooms, while the PN-Y475 offers a 47-inch option for spaces where a slightly smaller display is required. The PN-Y425, featuring a 42-inch screen, is ideal for smaller settings or areas with limited space.

All three models incorporate advanced LED backlighting technology, which delivers energy-efficient performance and reliable brightness levels. This ensures consistent performance over long periods, making these displays suitable for extended use. Additionally, the anti-glare coating minimizes reflections and enhances visibility, making content easily viewable even in brightly lit environments.

Connectivity is another major highlight of the Sharp PN-Y series. Each model comes equipped with multiple input options, including HDMI, DisplayPort, and USB, making it easy to connect to a variety of devices such as computers, media players, and streaming devices. This flexibility enables seamless content sharing in collaborative environments.

For added functionality, the displays also support touchscreen capabilities (available on certain models), allowing for interactive presentations and engaging user experiences. This feature is especially beneficial in educational settings, where students can actively participate in learning.

Furthermore, the PN-Y series incorporates built-in speakers, providing clear audio output without the need for external audio systems, which simplifies setup and enhances the overall experience.

In summary, the Sharp PN-Y475, PN-Y555, and PN-Y425 are designed to deliver outstanding performance and versatility for professional environments. With their high-quality visuals, extensive connectivity options, and user-friendly features, they stand out as valuable tools for effective communication and collaboration. Whether for corporate presentations or educational purposes, these displays are equipped to enhance engagement and improve the flow of information in any setting.