Sharp PN-Y425 For the monitor in landscape orientation, For the monitor in portrait orientation

Page 8

MOUNTING PRECAUTIONS

•This product is for use indoors.

•A mounting bracket compliant with VESA specifications is required.

•Since the monitor is heavy, consult your dealer before installing, removing or moving the monitor.

•Mounting the monitor on the wall requires special expertise and the work must be performed by an authorized SHARP dealer. You should never attempt to perform any of this work yourself. Our company will bear no responsibility

for accidents or injuries caused by improper mounting or mishandling.

•Use the monitor with the surface perpendicular to a level surface. If necessary, the monitor may be tilted up to 20 degrees upward or downward.

•This monitor should be used at an ambient temperature between 32°F (0°C) and 104°F (40°C).

Provide enough space around the monitor to prevent heat from accumulating inside.

For the monitor in landscape orientation

 

Unit: inch [mm]

7-7/8 [200]

 

2

2

[50]

[50]

2 [50]

5/16 [7]

For the monitor in portrait orientation

•Adhere to the following when installing the monitor in its portrait orientation. Failing to adhere to the following may cause malfunctions.

-Install the monitor such that the power LED is located on the bottom side.

-Set the THERMAL SENSOR SETTING on the SETUP menu to PORTRAIT. (See page 27.)

•Use the supplied vertical sticker when you install the monitor in portrait orientation.

Vertical sticker

Vertical sticker (Operation panel) (Logo)

Do not remove the factory-affixed sticker but affix the sticker over it. Be careful not to cover the remote control sensor or buttons.

 

7-7/8 [200]

2

2

[50]

[50]

 

2 [50]

Unit: inch [mm] 5/16 [7]

Power LED

•If it is difficult to provide sufficient space for any reason such as the installation of the monitor inside a housing, or if the ambient temperature may be outside of the range of 32°F (0°C) to 104°F (40°C), install a fan or take other measures to keep the ambient temperature within the required range.

•Do not block any ventilation openings. If the temperature inside the monitor rises, this could lead to a malfunction.

•Do not place the monitor on a device which generates heat.

E8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents PN-Y555 PN-Y475 PN-Y425 Page For Customers in U.K GREEN-AND-YELLOWBlue BrownDear Sharp Customer Safety Precautions Safety Precautions Tips and Safety Instructions Do not place the monitor on a device which generates heat For the monitor in landscape orientationFor the monitor in portrait orientation Contents Supplied ComponentsSub input terminal See LCD panel Remote control sensor SeePart Names NRemote control unit Part Names Signal transmitter11 E Return button See SIZE/Yellow button SeeConnecting Peripheral Equipment Connecting Peripheral Equipment 13 EConnecting the Power Cord Binding CablesAttachment PN-Y425Setting the USB flash drive cover Affixing the Stand Hole Protection Covers15 E USB port USB flash drive cover screwRemote control operation range Preparing the Remote Control UnitInstalling the batteries Turning Power On/Off Turning power on/offTurning on the main power 17 ESetting of the Setup menu. Be sure to set the date and time Turning Power On/Off NOperation modeNDate/time setting Basic Operation 19 EDot by Dot Basic Operation NSwitching the screen sizeNormal Wide Playing the Files in a USB Flash Drive 21 EAuto playback Playing filesPlaying files using the Schedule function PhotoMovie MusicOperations during play Settings23 E Playing the Files in a USB Flash Drive Settings during play Color ModeVolume SizeMenu Items 25 EDisplaying the menu screen NExample of operationMenu item details Menu ItemsNSCREEN NPICTUREMenu Items NAUDIO NSETUP27 E Standby Mode Power on DelayScan Mode Hdmiav Adjustment LockSetting procedure Set using Multi in the Setup menu29 E Menu Items NEnlargeMenu Items NSCHEDULE Menu Items NScreen display for adjustment Opening the adjustment pattern31 E ScheduleCommunication procedure Controlling the Monitor with a PC RS-232CCommunication conditions PC connectionNResponse code format NID Setting33 E 002 VOLM0030VOLM0020 ← OK 002 IDLK0000 ← Wait ← OK 002 ← VOLM0010 OK 001 ←NRepeater control command Volume settings for all monitors are returned35 E Controlling the Monitor with a PC RS-232C NRepeater controlRS-232C command table Power control/Input mode selectionControlling the Monitor with a PC RS-232C Screen menuOthers Controlling the Monitor with a PC RS-232C Setup menu37 E Settings to connect to a LAN Controlling the Monitor with a PC LANTo set on the monitor Character inputControlling the Monitor with a PC LAN Command-based control39 E Troubleshooting 41 E TroubleshootingPower LED is flashing in red and green alternately Specifications NProduct Specifications43 E NDimensional DrawingsSpecifications NDDC plug and play Specifications NPower managementDmpm Digital Monitor Power Management Specifications NCompatible signal timing PC NCompatible signal timing AV45 E DVI-D HdmiSpecifications NDVI-D input terminal pins NHDMI input terminal pinsND-sub input terminal pins NRS-232C input terminal pins47 E NDVI-D output terminal pinsSpecifications NRS-232C output terminal pins Mounting Precautions For Sharp dealers and service engineers PN-Y555-Y475-Y425 Me EN14G2

PN-Y425, PN-Y475, PN-Y555 specifications

The Sharp PN-Y475, PN-Y555, and PN-Y425 are part of Sharp's range of professional displays designed to meet the demands of contemporary business and educational environments. These displays boast impressive features and advanced technologies, making them ideal for various applications, including digital signage, presentations, and collaborative work.

One of the standout features across this series is their superior image quality. The displays utilize full HD (1920 x 1080) resolution, ensuring that images, videos, and text are sharp and vibrant. The PN-Y555, with its 55-inch screen size, is perfect for medium to large meeting rooms, while the PN-Y475 offers a 47-inch option for spaces where a slightly smaller display is required. The PN-Y425, featuring a 42-inch screen, is ideal for smaller settings or areas with limited space.

All three models incorporate advanced LED backlighting technology, which delivers energy-efficient performance and reliable brightness levels. This ensures consistent performance over long periods, making these displays suitable for extended use. Additionally, the anti-glare coating minimizes reflections and enhances visibility, making content easily viewable even in brightly lit environments.

Connectivity is another major highlight of the Sharp PN-Y series. Each model comes equipped with multiple input options, including HDMI, DisplayPort, and USB, making it easy to connect to a variety of devices such as computers, media players, and streaming devices. This flexibility enables seamless content sharing in collaborative environments.

For added functionality, the displays also support touchscreen capabilities (available on certain models), allowing for interactive presentations and engaging user experiences. This feature is especially beneficial in educational settings, where students can actively participate in learning.

Furthermore, the PN-Y series incorporates built-in speakers, providing clear audio output without the need for external audio systems, which simplifies setup and enhances the overall experience.

In summary, the Sharp PN-Y475, PN-Y555, and PN-Y425 are designed to deliver outstanding performance and versatility for professional environments. With their high-quality visuals, extensive connectivity options, and user-friendly features, they stand out as valuable tools for effective communication and collaboration. Whether for corporate presentations or educational purposes, these displays are equipped to enhance engagement and improve the flow of information in any setting.
Top Page Image Contents