Menu Items
Menu item details
The menu will differ depending on the input mode.
nSCREEN
AUTO (PC3/PC4)
The CLOCK, PHASE,
Pressing 
performs adjustment.
Use this automatic adjustment when you use the PC3 input terminal or PC4 input terminals to display a PC screen for the first time or when you change the setting of the PC. (See page 10.)
CLOCK (PC3/PC4)
Adjusts frequency for sampling clock for applicable video. Adjust when there is flickering in the form of vertical stripes. When using the adjustment pattern (see page 10), make adjustments so that no vertical stripe noise appears in it.
PHASE (PC3/PC4)
Adjusts sampling clock phase for applicable video.
Useful when small characters appear with low contrast and/ or there are flickers at corners.
When using the adjustment pattern (see page 10), make adjustments so that no horizontal stripe noise appears in it.
*Adjustments to PHASE should be made only after CLOCK has been correctly set.
Adjust the horizontal position of the image.
Adjust the vertical position of the image.
Adjust the horizontal size of the image.
Adjust the vertical size of the image.
H-RESOLUTION (PC3/PC4)
Sets proper horizontal resolution when the resolution of input signals is not recognized properly. (Adjustment may be impossible with some signals.)
Sets proper vertical resolution when the resolution of input signals is not recognized properly. (Adjustment may be impossible with some signals.)
RESET
Resets the values of the SCREEN menu items to the factory preset values.
Select “ON” and then press 
nPICTURE
AUTO (PC3/PC4)
The CONTRAST and BLACK LEVEL are automatically adjusted.
Pressing 
performs adjustment.
CONTRAST
Adjusts the brightness of the image.
BLACK LEVEL
Adjusts the entire brightness of the video signals.
TINT
Adjusts the hue. Selecting + changes the color towards green, and selecting - changes it towards magenta.
COLORS
Adjusts the color intensity.
SHARPNESS
Adjusts the sharpness of the image.
ADVANCED (AV input)
You can adjust more specifically. (See page 10.)
COLOR MODE
Changes the color mode on the screen. The color mode on the screen can also be changed using a remote control unit. (See page 3.)
*sRGB is PC input only. See page 3 for details.
WHITE BALANCE
THRU | Displays the input signal level as is. (for PC1/ |
| PC2 only) |
PRESET | Selects the color temperature using PRESET. |
USER | Used for adjusting |
| |
| respectively. |
PRESET
Selects the color temperature when the WHITE BALANCE is set to PRESET.
The setting values are shown for reference. The color temperature of the screen varies over time.
This function is not intended to keep the color temperature constant.
Adjusts red component when the WHITE BALANCE is set to USER.
Adjusts green component when the WHITE BALANCE is set to USER.
Adjusts blue component when the WHITE BALANCE is set to USER.
COPY TO USER
Copies the value set for PRESET to the USER setting.
Select “ON” and then press MENU .
GAMMA
Select a gamma value.
RESET
Resets the values of the PICTURE menu items to the factory preset values.
Select “ON” and then press 
nAUDIO
TREBLE
Adjusts the volume of
BASS
Adjusts the volume of
BALANCE
Adjusts the balance of the audio sound between right and left.
RESET
Resets the values of the AUDIO menu items to the factory preset values.
Select “ON” and then press MENU .
E6