Sharp PN-S655 manual Controlling the Monitor with a PC RS-232C Others, Temperature Sensor Dsta

Controlling the Monitor with a PC (RS-232C)

Others

Function		Command	Direction	Parameter	Reply	Control/Response contents	*
SCREEN SIZE (PC)		WIDE	WR	1-5	1-5	1: WIDE, 2: NORMAL, 3: Dot by Dot, 4: ZOOM1, 5: ZOOM2	B
SCREEN SIZE (AV)		WIDE	WR	1-5	1-5	1: WIDE, 2: ZOOM1, 3: ZOOM2, 4: NORMAL, 5: Dot by Dot	B
VOLUME		VOLM	WR	0-31	0-31		B
MUTE		MUTE	WR	0-1	0-1	0: OFF, 1: ON	-
INFORMATION	MODEL	INF1	R		Value		A
	SERIAL NO	SRNO	R		Value
BRIGHT		VLMP	WR	0-31	0-31	Brightness	B
TEMPERATURE SENSOR		DSTA	R		0	Internal temperature normal
					1	Internal temperature abnormal (Standby mode)
					2	Internal temperature abnormal (Temperature is normal now, but it was	A
						abnormal during operation.)
					3	Internal temperature abnormal (Brightness of the backlight decreases.)
					4	Temperature sensor abnormal
Temperature acquisition		ERRT	R		Value	Temperature at temperature sensors 1 through 3 are returned in the
						following forms:	A
						[Sensor 1], [Sensor 2], [Sensor 3]
						Indicates a temperature sensor abnormality when “126” is returned.
CAUSE OF LAST STANDBY MODE		STCA	W	0		Initialization
			R		0	No detectable error has occurred
					1	Standby mode by POWER button
					2	Main power “OFF” by the main power switch	A
					3	Standby mode by RS-232C or LAN
					4	Waiting mode by No Signal (Incl: VESA DPMS/DMPM)
					6	Standby mode by abnormal temperature
					8	Standby mode by SCHEDULE setting

E20