Sharp PN-U473, PN-U553, PN-U423 Preparing the Remote Control Unit, 15 E, Installing the batteries

Page 15

Preparing the Remote Control Unit

Installing the batteries

1.Press the cover gently and slide it in the direction of the arrow.

2.See the instructions in the compartment and put in the supplied batteries (R-6 (“AA” size) x 2) with their plus (+) and minus (-) sides oriented correctly.

3.Close the cover.

TIPS

•When the batteries become exhausted, replace them with new (commercially available) batteries.

•The supplied batteries (R-6 (“AA” size) x 2) may become exhausted quickly depending on how they are stored.

•If you will not be using the remote control for a long time, remove the batteries.

•Use manganese or alkaline batteries only.

Remote control operation range

The operation range of the remote control unit is approx. 16.4 feet (5 m) at an angle of approx 10° from the center to the top/ bottom/right/left of the remote control sensor.

Remote control sensor

10°

 

 

16.4

 

 

 

 

 

 

 

 

feet

 

 

 

 

 

 

 

 

10°

 

 

 

 

 

 

10°

(5 m)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10°

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TIPS

•Do not expose the remote control unit to shock by dropping or stepping on it. This could lead to a malfunction.

•Do not expose the remote control unit to liquids, and do not place it in an area with high humidity.

•The remote control unit may not work properly if the remote control sensor is under direct sunlight or strong lighting.

•Objects between the remote control unit and the remote control sensor may prevent proper operation.

•Replace the batteries when they run low as this may shorten the remote control’s operation range.

•If a fluorescent light is illuminated near the remote control unit, it may interfere with proper operation.

•Do not use it with the remote control of other equipment such as air conditioner, stereo components, etc.

15 E

Page 14 Page 16
Image 15
Page 14 Page 16
Contents PN-U553 PN-U473 PN-U423 Other Countries outside the EU Information on Disposal for Users private householdsInformation on Disposal for Business Users European UnionBrown For Customers in U.KGREEN-AND-YELLOW BlueDear Sharp Customer Safety Precautions Tips and Safety Instructions For the monitor in portrait orientation For the monitor in landscape orientationSupplied Components ContentsLCD panel Remote control sensor See Input switch See Power switch SeePart Names NFront view NRear viewPart Names NRemote control unit Signal transmitterReturn button See Size button See 11 E Connecting Peripheral EquipmentConnecting Peripheral Equipment 13 E Connecting the Power CordPN-U553 Cables connected to the terminals on the rear Binding Cables15 E Preparing the Remote Control UnitInstalling the batteries Remote control operation rangeStatus Status of the monitor Turning Power On/OffTurning on the main power Turning power on/offTurning Power On/Off NOperation mode NDate/time setting17 E Basic Operation Dot by Dot Basic Operation NSwitching the screen size19 E Wide NormalNExample of operation Menu ItemsDisplaying the menu screen NMenu screen displayNSCREEN 21 EMenu item details Menu ItemsMenu Items NPICTURE NSETUP 23 EMenu Items NAUDIO NMULTI/PIP Menu Items NMONITORMenu Items NOTHERS 25 EMenu Items NDual screen display NEnlargePIP 27 E NSCHEDULEInput Opening the adjustment pattern Adjustments for PC screen displayNAutomatic adjustment NScreen display for adjustmentOSD Display ALL ResetAdjustment Lock 29 ECommunication procedure PC connection Controlling the Monitor with a PC RS-232CCommunication conditions 31 E NResponse code formatNID numbers OK 002 ← VOLM0010 OK 001 ← Wait ←NRepeater control command 33 EControlling the Monitor with a PC RS-232C NRepeater control Controlling the Monitor with a PC RS-232C RS-232C command tablePower control/Input mode selection How to read the command table35 E Controlling the Monitor with a PC RS-232C Picture menuAudio menu Monitor menu Controlling the Monitor with a PC RS-232C Setup menuOthers menu Initialization/Functional Restriction Setting Function menu37 E Controlling the Monitor with a PC RS-232C MULTI/PIP menuControlling the Monitor with a PC RS-232C Others Temperature Sensor DstaTo set on the monitor Settings to connect to a LANControlling the Monitor with a PC LAN 39 EControlling the Monitor with a PC LAN To set from a PC Set up processBasic operation 41 EControlling with a PC Controlling the Monitor with a PC LANAudio SetupControlling the Monitor with a PC LAN PC operation Screen Picture43 E Advanced operation Command-based control 45 E TroubleshootingPower LED is flashing in red and green alternately TroubleshootingSpecifications NProduct Specifications47 E Specifications NDimensional Drawings Specifications NPower management 49 ENDDC plug and play NCompatible signal timing AV Specifications NCompatible signal timing PC51 E NRS-232C output terminal pins Specifications NDVI-D output terminal pins53 E PN-U553U473U423 Me EN13G1
Related manuals
Manual 2 pages 28.05 Kb Manual 28 pages 17.73 Kb

PN-U423, PN-U473, PN-U553 specifications

The Sharp PN-U473 is a sophisticated large-format display ideal for a variety of commercial environments, offering both stunning visuals and robust features. This 47-inch LCD panel is designed with versatility in mind, making it suitable for digital signage, presentations, and information displays across various sectors.

One of the standout features of the PN-U473 is its ultra-thin bezel, which enhances immersion when used in multi-screen configurations. This design element minimizes distractions, allowing viewers to focus on the content being displayed. The Full HD resolution of 1920 x 1080 ensures that images and text are crisp and clear, providing superior visual performance that is crucial for conveying important information.

The PN-U473 is equipped with advanced display technologies, including a high brightness level of up to 500 cd/m². This makes it particularly effective in high-ambient light environments, where visibility is often a concern. The display utilizes LED backlighting, which not only enhances brightness and contrast but also contributes to energy efficiency, helping businesses reduce operational costs.

Connectivity options are extensive, featuring multiple inputs including HDMI, DisplayPort, and VGA, which provide flexibility for various multimedia sources. The built-in USB media player further enhances its functionality, allowing users to display files directly without the need for a separate computer.

Additionally, the PN-U473 supports advanced image processing technologies that ensure smooth video playback and excellent color accuracy. This capability is essential for applications where detail and clarity are paramount, such as retail or corporate environments.

Moreover, the display is designed for 24/7 operation, making it a reliable choice for continuous use scenarios where downtime can be costly. Its robust thermal management system helps maintain optimal performance under prolonged use.

In conclusion, the Sharp PN-U473 combines cutting-edge display technology with practical features tailored for commercial applications. Its impressive visual quality, versatile connectivity, and durability make it a valuable asset for businesses looking to enhance communication and engagement through impactful visual presentations. Whether in retail, corporate settings, or public spaces, this display stands out as a reliable solution for effective messaging and information dissemination.
Top Page Image Contents