Sharp PN-U473, PN-U553, PN-U423 operation manual 21 E, Menu item details, Menu Items, Nscreen

Page 21

Menu Items

Menu item details

The menu will differ depending on the input mode.

nSCREEN

AUTO (D-SUB)

The CLOCK, PHASE, H-POS, and V-POS are automatically adjusted.

Pressing ENTER performs adjustment. Use this automatic adjustment when you use the D-SUB to display a PC screen for the first time or when you change the setting of the PC. (See page 28.)

SELF ADJUST (D-SUB)

On a D-SUB screen, specify whether to perform screen adjustment automatically or not.

When ON is selected, the screen is automatically adjusted when the timing of input signals changes.

For images with black edges, etc., depending on the signal, adjustment may not be possible. In this case select OFF. (Perform manual adjustment of the screen.)

CLOCK (D-SUB)

Adjusts frequency for sampling clock for applicable video. Adjust when there is flickering in the form of vertical stripes.

When using the adjustment pattern (see page 28), make adjustments so that no vertical stripe noise appears in it.

PHASE (D-SUB)

Adjusts sampling clock phase for applicable video. Useful when small characters appear with low contrast and/or there are flickers at corners. When using the adjustment pattern (see page 28), make adjustments so that no horizontal stripe noise appears in it.

*Adjustments to PHASE should be made only after CLOCK has been correctly set.

H-POS (D-SUB)

Adjust the horizontal position of the image.

V-POS (D-SUB)

Adjust the vertical position of the image.

SIZE

Changes the screen size. The screen size can also be changed using a remote control unit. (See page 19.)

CUSTOM ZOOM

Sets the image size and display area when SIZE is set to CUSTOM.

ZOOM

Enlarge and display part of the image.

H-ZOOM

Adjust the horizontal size of the image.

V-ZOOM

Adjust the vertical size of the image.

H-POS / V-POS (D-SUB)

Adjust the display position of the enlarged image.

INPUT RESOLUTION (D-SUB)

If a computer connected to the D-SUB output any of the following resolution, make a selection from the following options.

768

AUTO, 1024x768, 1280x768, or 1360x768

1050

AUTO, 1400x1050 or 1680x1050

1200

AUTO, 1600x1200 or 1920x1200

RESET

Resets the values of the SCREEN menu items to the factory preset values.

Select “ON” and then press ENTER.

21 E

Page 20 Page 22
Image 21
Page 20 Page 22
Contents PN-U553 PN-U473 PN-U423 Information on Disposal for Business Users Information on Disposal for Users private householdsEuropean Union Other Countries outside the EUGREEN-AND-YELLOW For Customers in U.KBlue BrownDear Sharp Customer Safety Precautions Tips and Safety Instructions For the monitor in portrait orientation For the monitor in landscape orientationSupplied Components ContentsPart Names Remote control sensor See Input switch See Power switch SeeNFront view NRear view LCD panelPart Names NRemote control unit Signal transmitterReturn button See Size button See 11 E Connecting Peripheral EquipmentConnecting Peripheral Equipment 13 E Connecting the Power CordPN-U553 Cables connected to the terminals on the rear Binding CablesInstalling the batteries Preparing the Remote Control UnitRemote control operation range 15 ETurning on the main power Turning Power On/OffTurning power on/off Status Status of the monitorTurning Power On/Off NOperation mode NDate/time setting17 E Basic Operation 19 E Basic Operation NSwitching the screen sizeWide Normal Dot by DotDisplaying the menu screen Menu ItemsNMenu screen display NExample of operationMenu item details 21 EMenu Items NSCREENMenu Items NPICTURE NSETUP 23 EMenu Items NAUDIO NMULTI/PIP Menu Items NMONITORMenu Items NOTHERS 25 EMenu Items NDual screen display NEnlargePIP 27 E NSCHEDULEInput NAutomatic adjustment Adjustments for PC screen displayNScreen display for adjustment Opening the adjustment patternAdjustment Lock ALL Reset29 E OSD DisplayCommunication procedure PC connection Controlling the Monitor with a PC RS-232CCommunication conditions 31 E NResponse code formatNID numbers OK 002 ← VOLM0010 OK 001 ← Wait ←NRepeater control command 33 EControlling the Monitor with a PC RS-232C NRepeater control Power control/Input mode selection RS-232C command tableHow to read the command table Controlling the Monitor with a PC RS-232C35 E Controlling the Monitor with a PC RS-232C Picture menuAudio menu Monitor menu Controlling the Monitor with a PC RS-232C Setup menu37 E Initialization/Functional Restriction Setting Function menuControlling the Monitor with a PC RS-232C MULTI/PIP menu Others menuControlling the Monitor with a PC RS-232C Others Temperature Sensor DstaControlling the Monitor with a PC LAN Settings to connect to a LAN39 E To set on the monitorControlling the Monitor with a PC LAN To set from a PC Set up processControlling with a PC 41 EControlling the Monitor with a PC LAN Basic operationControlling the Monitor with a PC LAN PC operation SetupScreen Picture Audio43 E Advanced operation Command-based control 45 E TroubleshootingPower LED is flashing in red and green alternately TroubleshootingSpecifications NProduct Specifications47 E Specifications NDimensional Drawings Specifications NPower management 49 ENDDC plug and play NCompatible signal timing AV Specifications NCompatible signal timing PC51 E NRS-232C output terminal pins Specifications NDVI-D output terminal pins53 E PN-U553U473U423 Me EN13G1
Related manuals
Manual 2 pages 28.05 Kb Manual 28 pages 17.73 Kb

PN-U423, PN-U473, PN-U553 specifications

The Sharp PN-U473 is a sophisticated large-format display ideal for a variety of commercial environments, offering both stunning visuals and robust features. This 47-inch LCD panel is designed with versatility in mind, making it suitable for digital signage, presentations, and information displays across various sectors.

One of the standout features of the PN-U473 is its ultra-thin bezel, which enhances immersion when used in multi-screen configurations. This design element minimizes distractions, allowing viewers to focus on the content being displayed. The Full HD resolution of 1920 x 1080 ensures that images and text are crisp and clear, providing superior visual performance that is crucial for conveying important information.

The PN-U473 is equipped with advanced display technologies, including a high brightness level of up to 500 cd/m². This makes it particularly effective in high-ambient light environments, where visibility is often a concern. The display utilizes LED backlighting, which not only enhances brightness and contrast but also contributes to energy efficiency, helping businesses reduce operational costs.

Connectivity options are extensive, featuring multiple inputs including HDMI, DisplayPort, and VGA, which provide flexibility for various multimedia sources. The built-in USB media player further enhances its functionality, allowing users to display files directly without the need for a separate computer.

Additionally, the PN-U473 supports advanced image processing technologies that ensure smooth video playback and excellent color accuracy. This capability is essential for applications where detail and clarity are paramount, such as retail or corporate environments.

Moreover, the display is designed for 24/7 operation, making it a reliable choice for continuous use scenarios where downtime can be costly. Its robust thermal management system helps maintain optimal performance under prolonged use.

In conclusion, the Sharp PN-U473 combines cutting-edge display technology with practical features tailored for commercial applications. Its impressive visual quality, versatile connectivity, and durability make it a valuable asset for businesses looking to enhance communication and engagement through impactful visual presentations. Whether in retail, corporate settings, or public spaces, this display stands out as a reliable solution for effective messaging and information dissemination.
Top Page Image Contents