Sharp PN-U473, PN-U553, PN-U423 operation manual 27 E, Nschedule, Input

Page 27

nSCHEDULE

You can set the time to switch the monitor on and off.

Set this function with SCHEDULE in the SETUP menu. (See page 23.)

SCHEDULE

 

 

 

D-SUB

(1)

 

XXXX / XX / XX

XX

XX : XX : XX

 

 

 

 

 

 

 

 

(2)

(3)

(4)

 

 

 

 

 

 

 

 

 

ON

OFF

INPUT

 

 

 

– :–

– :–

–

 

 

 

(5) EVERY DAY

MON

TUE

 

 

 

WED

 

THU

FRI

 

 

 

SAT

 

SUN

EVERY WEEK

BACK···[RETURN]

1 9 2 0 x1 0 8 0

V: 60 Hz H: 67.5 kHz

1.Press or to select the SCHEDULE number, and press .

2.Set the SCHEDULE. ((2) to (5) below)

Press or to select items.

3.Press RETURN.

4.Press or to select the SCHEDULE number, and press ENTER. ((1) below)

SCHEDULE becomes effective.

(1)SCHEDULE number

Enable/disable the SCHEDULE with ENTER.

■: SCHEDULE effective

□: SCHEDULE not effective

(2) ON

Specify the time the power turns on with or . Set the time on a 24-hour basis.

(3) OFF

Specify the time the power turns off with or . Specify a time later than the time the power is turned on. Set the time on a 24-hour basis.

(4) INPUT

Specify the input mode at power on with or . If you don’t specify this the input active at the last power-off will appear.

(5) Day of the week

Specifies the day of the week to execute the SCHEDULE

with ENTER.

•EVERY DAY

Executes the SCHEDULE every day regardless of the day of the week.

•MON - SUN

Executes the SCHEDULE once on the specified day.

•EVERY WEEK

Executes the SCHEDULE on the specified day every week.

Select EVERY WEEK and specify the day of the week

(MON - SUN).

Menu Items

Caution

•Do not switch off the main power after setting the

SCHEDULE.

•Specify the correct date and time. (See page 23.)

SCHEDULE does not function unless the date and time are specified.

•Check regularly that the set date and time are correct.

TIPS

•Up to 7 SCHEDULE items can be registered.

•Setting the SCHEDULE flashes the power LED alternately in red and orange in standby mode.

•A SCHEDULE that has a large number has precedence over that of a small number when schedules overlap.

•In the following cases, set separate power-on SCHEDULE and power-off SCHEDULE:

-The power is turned off and then on, in that order, in the

SCHEDULE

-The power is turned on and then off, in that order, in the SCHEDULE, but the power-off time is the next day or later

27 E

Page 26 Page 28
Image 27
Page 26 Page 28
Contents PN-U553 PN-U473 PN-U423 Other Countries outside the EU Information on Disposal for Users private householdsInformation on Disposal for Business Users European UnionBrown For Customers in U.KGREEN-AND-YELLOW BlueDear Sharp Customer Safety Precautions Tips and Safety Instructions For the monitor in portrait orientation For the monitor in landscape orientationSupplied Components ContentsLCD panel Remote control sensor See Input switch See Power switch SeePart Names NFront view NRear viewPart Names NRemote control unit Signal transmitterReturn button See Size button See 11 E Connecting Peripheral EquipmentConnecting Peripheral Equipment 13 E Connecting the Power CordPN-U553 Cables connected to the terminals on the rear Binding Cables15 E Preparing the Remote Control UnitInstalling the batteries Remote control operation rangeStatus Status of the monitor Turning Power On/OffTurning on the main power Turning power on/offTurning Power On/Off NOperation mode NDate/time setting17 E Basic Operation Dot by Dot Basic Operation NSwitching the screen size19 E Wide NormalNExample of operation Menu ItemsDisplaying the menu screen NMenu screen displayNSCREEN 21 EMenu item details Menu ItemsMenu Items NPICTURE NSETUP 23 EMenu Items NAUDIO NMULTI/PIP Menu Items NMONITORMenu Items NOTHERS 25 EMenu Items NDual screen display NEnlargePIP 27 E NSCHEDULEInput Opening the adjustment pattern Adjustments for PC screen displayNAutomatic adjustment NScreen display for adjustmentOSD Display ALL ResetAdjustment Lock 29 ECommunication procedure PC connection Controlling the Monitor with a PC RS-232CCommunication conditions 31 E NResponse code formatNID numbers OK 002 ← VOLM0010 OK 001 ← Wait ←NRepeater control command 33 EControlling the Monitor with a PC RS-232C NRepeater control Controlling the Monitor with a PC RS-232C RS-232C command tablePower control/Input mode selection How to read the command table35 E Controlling the Monitor with a PC RS-232C Picture menuAudio menu Monitor menu Controlling the Monitor with a PC RS-232C Setup menuOthers menu Initialization/Functional Restriction Setting Function menu37 E Controlling the Monitor with a PC RS-232C MULTI/PIP menuControlling the Monitor with a PC RS-232C Others Temperature Sensor DstaTo set on the monitor Settings to connect to a LANControlling the Monitor with a PC LAN 39 EControlling the Monitor with a PC LAN To set from a PC Set up processBasic operation 41 EControlling with a PC Controlling the Monitor with a PC LANAudio SetupControlling the Monitor with a PC LAN PC operation Screen Picture43 E Advanced operation Command-based control 45 E TroubleshootingPower LED is flashing in red and green alternately TroubleshootingSpecifications NProduct Specifications47 E Specifications NDimensional Drawings Specifications NPower management 49 ENDDC plug and play NCompatible signal timing AV Specifications NCompatible signal timing PC51 E NRS-232C output terminal pins Specifications NDVI-D output terminal pins53 E PN-U553U473U423 Me EN13G1
Related manuals
Manual 2 pages 28.05 Kb Manual 28 pages 17.73 Kb

PN-U423, PN-U473, PN-U553 specifications

The Sharp PN-U473 is a sophisticated large-format display ideal for a variety of commercial environments, offering both stunning visuals and robust features. This 47-inch LCD panel is designed with versatility in mind, making it suitable for digital signage, presentations, and information displays across various sectors.

One of the standout features of the PN-U473 is its ultra-thin bezel, which enhances immersion when used in multi-screen configurations. This design element minimizes distractions, allowing viewers to focus on the content being displayed. The Full HD resolution of 1920 x 1080 ensures that images and text are crisp and clear, providing superior visual performance that is crucial for conveying important information.

The PN-U473 is equipped with advanced display technologies, including a high brightness level of up to 500 cd/m². This makes it particularly effective in high-ambient light environments, where visibility is often a concern. The display utilizes LED backlighting, which not only enhances brightness and contrast but also contributes to energy efficiency, helping businesses reduce operational costs.

Connectivity options are extensive, featuring multiple inputs including HDMI, DisplayPort, and VGA, which provide flexibility for various multimedia sources. The built-in USB media player further enhances its functionality, allowing users to display files directly without the need for a separate computer.

Additionally, the PN-U473 supports advanced image processing technologies that ensure smooth video playback and excellent color accuracy. This capability is essential for applications where detail and clarity are paramount, such as retail or corporate environments.

Moreover, the display is designed for 24/7 operation, making it a reliable choice for continuous use scenarios where downtime can be costly. Its robust thermal management system helps maintain optimal performance under prolonged use.

In conclusion, the Sharp PN-U473 combines cutting-edge display technology with practical features tailored for commercial applications. Its impressive visual quality, versatile connectivity, and durability make it a valuable asset for businesses looking to enhance communication and engagement through impactful visual presentations. Whether in retail, corporate settings, or public spaces, this display stands out as a reliable solution for effective messaging and information dissemination.
Top Page Image Contents