Sharp PN-U423, PN-U473, PN-U553 operation manual Wait ←, OK 002 ← VOLM0010 OK 001 ←

Page 32

Controlling the Monitor with a PC (RS-232C)

nCommands for ID control

The command examples shown on this page assume the following connection and ID number set up.

ID number: 1 ID number: 2 ID number: 3 ID number: 4

IDST..........A monitor receiving this command sets its own ID

number in the parameter field.

Example:

IDST0001

OK 001 ← The ID number of this monitor is set to 1.

IDLK.........The parameter of this command sets the ID

number of the monitor. The monitor is subject to all subsequent commands.

Example:

IDLK0002

Following commands are for the monitor

 

 

 

with ID number: 2.

WAIT

 

Searching for monitor with ID number:

 

 

 

2

OK

002

Found monitor with ID number: 2

VOLM0030

Sets volume of monitor with ID

 

 

 

number: 2 to 30.*

WAIT

 

Processing

OK

002

 

 

TIPS

You can automatically assign ID numbers by using the IDST command with the Repeater control (see “Repeater control” on page 33).

For example, using the command “IDST001+” automatically sets the ID numbers, as shown below.

[Example]

ID number: 1 ID number: 2 ID number: 3 ID number: 4

VOLM0020 ←

WAIT

OK 002 IDLK0000 ←

WAIT ←

OK 002 ← VOLM0010

OK 001 ←

Sets volume of monitor with ID number: 2 to 20.*

Canceling fixed ID number setting Canceling IDLK

Cancelation complete

The volume of the monitor with ID number: 1 (the one directly connected to the PC) is set to 10. (IDLK is canceled.)

IDST001 +

ID setting command with repeater control

WAIT

*The IDLK command remains effective until it is canceled, or power is shut off.

OK

001

“OK” response from ID number: 1

OK

002

“OK” response from ID number: 2

OK

003

“OK” response from ID number: 3

OK

004

“OK” response from ID number: 4 (End)

IDSL.........The parameter of this command sets the ID number

of the monitor. The monitor is subject to the next command.

Example:

IDSL0002

The next command is for the monitor

 

 

 

with ID number: 2.

WAIT

 

Searching for monitor with ID number:

 

 

 

2

OK

002

Found monitor with ID number: 2

VOLM0030

Sets volume of monitor with ID

 

 

 

number: 2 to 30.

WAIT

 

Processing

OK

002

OK response from monitor with ID

 

 

 

number: 2

VOLM0020

Sets volume to 20.

OK

001

 

The volume of the monitor with ID

number: 1 (the one directly connected

to the PC) is set to 20.*

*The IDSL command is effective only once, for the immediately succeeding command.

E32

Image 32
Contents PN-U553 PN-U473 PN-U423 Information on Disposal for Users private households Information on Disposal for Business UsersEuropean Union Other Countries outside the EUFor Customers in U.K GREEN-AND-YELLOWBlue BrownDear Sharp Customer Safety Precautions Tips and Safety Instructions For the monitor in landscape orientation For the monitor in portrait orientationContents Supplied ComponentsRemote control sensor See Input switch See Power switch See Part NamesNFront view NRear view LCD panelReturn button See Size button See Part Names NRemote control unitSignal transmitter Connecting Peripheral Equipment 11 EConnecting Peripheral Equipment Connecting the Power Cord 13 EBinding Cables PN-U553 Cables connected to the terminals on the rearPreparing the Remote Control Unit Installing the batteriesRemote control operation range 15 ETurning Power On/Off Turning on the main powerTurning power on/off Status Status of the monitor17 E Turning Power On/Off NOperation modeNDate/time setting Basic Operation Basic Operation NSwitching the screen size 19 EWide Normal Dot by DotMenu Items Displaying the menu screenNMenu screen display NExample of operation21 E Menu item detailsMenu Items NSCREENMenu Items NPICTURE Menu Items NAUDIO NSETUP23 E Menu Items NMONITOR NMULTI/PIP25 E Menu Items NOTHERSPIP Menu Items NDual screen displayNEnlarge Input 27 ENSCHEDULE Adjustments for PC screen display NAutomatic adjustmentNScreen display for adjustment Opening the adjustment patternALL Reset Adjustment Lock29 E OSD DisplayCommunication conditions Communication procedure PC connectionControlling the Monitor with a PC RS-232C NID numbers 31 ENResponse code format Wait ← OK 002 ← VOLM0010 OK 001 ←Controlling the Monitor with a PC RS-232C NRepeater control NRepeater control command33 E RS-232C command table Power control/Input mode selectionHow to read the command table Controlling the Monitor with a PC RS-232CAudio menu 35 EControlling the Monitor with a PC RS-232C Picture menu Controlling the Monitor with a PC RS-232C Setup menu Monitor menuInitialization/Functional Restriction Setting Function menu 37 EControlling the Monitor with a PC RS-232C MULTI/PIP menu Others menuTemperature Sensor Dsta Controlling the Monitor with a PC RS-232C OthersSettings to connect to a LAN Controlling the Monitor with a PC LAN39 E To set on the monitorSet up process Controlling the Monitor with a PC LAN To set from a PC41 E Controlling with a PCControlling the Monitor with a PC LAN Basic operationSetup Controlling the Monitor with a PC LAN PC operationScreen Picture Audio43 E Advanced operation Command-based control Troubleshooting 45 ETroubleshooting Power LED is flashing in red and green alternately47 E SpecificationsNProduct Specifications Specifications NDimensional Drawings NDDC plug and play Specifications NPower management49 E Specifications NCompatible signal timing PC NCompatible signal timing AV51 E Specifications NDVI-D output terminal pins NRS-232C output terminal pins53 E PN-U553U473U423 Me EN13G1
Related manuals
Manual 2 pages 28.05 Kb Manual 28 pages 17.73 Kb

PN-U423, PN-U473, PN-U553 specifications

The Sharp PN-U473 is a sophisticated large-format display ideal for a variety of commercial environments, offering both stunning visuals and robust features. This 47-inch LCD panel is designed with versatility in mind, making it suitable for digital signage, presentations, and information displays across various sectors.

One of the standout features of the PN-U473 is its ultra-thin bezel, which enhances immersion when used in multi-screen configurations. This design element minimizes distractions, allowing viewers to focus on the content being displayed. The Full HD resolution of 1920 x 1080 ensures that images and text are crisp and clear, providing superior visual performance that is crucial for conveying important information.

The PN-U473 is equipped with advanced display technologies, including a high brightness level of up to 500 cd/m². This makes it particularly effective in high-ambient light environments, where visibility is often a concern. The display utilizes LED backlighting, which not only enhances brightness and contrast but also contributes to energy efficiency, helping businesses reduce operational costs.

Connectivity options are extensive, featuring multiple inputs including HDMI, DisplayPort, and VGA, which provide flexibility for various multimedia sources. The built-in USB media player further enhances its functionality, allowing users to display files directly without the need for a separate computer.

Additionally, the PN-U473 supports advanced image processing technologies that ensure smooth video playback and excellent color accuracy. This capability is essential for applications where detail and clarity are paramount, such as retail or corporate environments.

Moreover, the display is designed for 24/7 operation, making it a reliable choice for continuous use scenarios where downtime can be costly. Its robust thermal management system helps maintain optimal performance under prolonged use.

In conclusion, the Sharp PN-U473 combines cutting-edge display technology with practical features tailored for commercial applications. Its impressive visual quality, versatile connectivity, and durability make it a valuable asset for businesses looking to enhance communication and engagement through impactful visual presentations. Whether in retail, corporate settings, or public spaces, this display stands out as a reliable solution for effective messaging and information dissemination.